如果你想在短時間內，以最小的努力，達到最有效果的結果Cisco的200-301考古題更新考試準備，你可以使用Goldmile-Infobiz Cisco的200-301考古題更新考試培訓資料，Goldmile-Infobiz的培訓資料是通過實踐檢驗了的，也是通過眾多考生證明了它確實可以百分百通過考試，利用了它，你將達到你的目的，得到最佳的效果。 當你嘗試了我們提供的關於Cisco 200-301考古題更新認證考試的部分考題及答案,你可以對我們Goldmile-Infobiz做出選擇了，我們會100%為你提供方便以及保障。請記住能讓你100%通過Cisco 200-301考古題更新認證考試的就是我們的Goldmile-Infobiz。 選擇Goldmile-Infobiz的培訓資料你將得到你最想要的培訓資料。
CCNA 200-301 為了明天的成功，選擇Goldmile-Infobiz是正確的。
那麼，你已經取得了現在最受歡迎的Cisco的200-301 - Cisco Certified Network Associate Exam考古題更新認定考試的資格了嗎？對於200-301 - Cisco Certified Network Associate Exam考古題更新考試，你瞭解多少呢？如果你想通過這個考試但是掌握的相關知識不足，你應該怎麼辦呢？不用著急，Goldmile-Infobiz可以給你提供幫助。 拿到了Cisco 200-301 學習指南 認證證書的人往往要比沒有證書的同行工資高很多。可是Cisco 200-301 學習指南 認證考試不是很容易通過的，所以Goldmile-Infobiz是一個可以幫助你增長收入的網站.
如果你覺得準備200-301考古題更新考試很難，必須要用很多時間的話，那麼你最好用Goldmile-Infobiz的200-301考古題更新考古題作為你的工具。因為它可以幫你節省很多的時間。Goldmile-Infobiz的200-301考古題更新考古題不僅可以幫你節省時間，更重要的是，它可以保證你通過考試。
Cisco 200-301考古題更新 - 在這種情況下，如果一個資格都沒有就趕不上別人了。
IT測試和認證在當今這個競爭激烈的世界變得比以往任何時候都更重要，這些都意味著一個與眾不同的世界的未來，Cisco的200-301考古題更新考試將是你職業生涯中的里程碑，並可能開掘到新的機遇，但你如何能通過Cisco的200-301考古題更新考試？別擔心，幫助就在眼前，有了Goldmile-Infobiz就不用害怕，Goldmile-Infobiz Cisco的200-301考古題更新考試的試題及答案是考試準備的先鋒。
我們保證200-301考古題更新考古題的品質，百分之百通過考試，對于購買我們網站200-301考古題更新題庫的客戶，還可以享受一年更新服務。在Cisco的200-301考古題更新考試題庫頁面中，我們擁有所有最新的考古題，由Goldmile-Infobiz資深認證講師和經驗豐富的技術專家精心編輯而來，完整覆蓋最新試題。
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 3
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 4
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 5
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
Cisco的WGU Information-Technology-Management考試認證是業界廣泛認可的IT認證，世界各地的人都喜歡Cisco的WGU Information-Technology-Management考試認證，這項認證可以強化自己的職業生涯，使自己更靠近成功。 我們還使用國際最大最值得信賴的Paypal付款，安全支付有保障，考生可以放心購買最新的BICSI INST1-V8考古題。 Cisco 300-425 - 有了目標就要勇敢的去實現。 Snowflake GES-C01 - 能使Goldmile-Infobiz在這麼多同行中脫穎而出的原因是我們有相當準確確命中考題的考試練習題和答案以及可以對考試練習題和答案迅速的更新。 Microsoft MB-500 - 就好比我，平時不努力，老大徒傷悲。
Updated: May 28, 2022