我們Goldmile-Infobiz的 Cisco的200-301考試資料的考題資料是按照相同的教學大綱來來研究的，同時也不斷升級我們的培訓材料，所以我們的考試培訓資料包括試題及答案，和實際的考試相似度非常高，所以形成了我們Goldmile-Infobiz的通過率也是非常的高，這也是不可否認的事實， 由此知道Goldmile-Infobiz Cisco的200-301考試資料考試培訓資料對考生的幫助，而且我們的價格絕對合理，適合每位IT認證的考生。 這幾年IT行業發展非常之迅速，那麼學IT的人也如洪水猛獸般迅速多了起來，他們為了使自己以後有所作為而不斷的努力，Cisco的200-301考試資料考試認證是IT行業必不可少的認證，許多人為想通過此認證而感到苦惱。今天我告訴大家一個好辦法，就是選擇Goldmile-Infobiz Cisco的200-301考試資料考試認證培訓資料，它可以幫助你們通過考試獲得認證，而且我們可以保證通過率100%，如果沒有通過，我們將保證退還全部購買費用，不讓你們有任何損失。 所以，只要你好好學習這個考古題，那麼通過200-301考試資料考試就不再是難題了。
CCNA 200-301 这是经过很多人证明过的事实。
CCNA 200-301考試資料 - Cisco Certified Network Associate Exam 人生充滿選擇，選擇不一定給你帶來絕對的幸福，但選擇給了你絕對的機會，而一旦錯過選擇，只能凝望。 這是一個被廣大考生檢驗過的網站，可以向大家提供最好的考試考古題。Goldmile-Infobiz全面保證考生們的利益，得到了大家的一致好評。
有了這個保證，你完全沒有必要再猶豫到底要不要買這個考古題了。错过了它将是你很大的损失。多年以來，Goldmile-Infobiz一直致力於為廣大參加IT認證考試的考生們提供最優秀並且最值得信賴的參考資料。
也有關於Cisco Cisco 200-301考試資料認證考試的考試練習題和答案。
作為IT認證考試學習資料的專業團隊，Goldmile-Infobiz是您獲得高品質學習資料的來源。無論您需要尋找什么樣子的Cisco 200-301考試資料考古題我們都可以提供，借助我們的200-301考試資料學習資料，您不必浪費時間去閱讀更多的參考書，只需花費20 – 30小時掌握我們的Cisco 200-301考試資料題庫問題和答案，就可以順利通過考試。我們為您提供PDF版本的和軟件版，還有在線測試引擎題庫，其中200-301考試資料軟件版本的題庫，可以模擬真實的考試環境，以滿足大家的需求，這是最優秀的200-301考試資料學習資料。
Goldmile-Infobiz的產品是為你們參加Cisco 200-301考試資料認證考試而準備的。Goldmile-Infobiz提供的培訓資料不僅包括與Cisco 200-301考試資料認證考試相關的資訊技術培訓資料，來鞏固專業知識，而且還有準確性很高的關於Cisco 200-301考試資料的認證考試的相關考試練習題和答案。
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Goldmile-Infobiz提供的培訓工具包含關於Cisco Microsoft DP-600認證考試的學習資料及類比訓練題，更重要的是還會給出跟考試很接近的練習題和答案。 PMI PMP-CN - 如果你考試不小心失敗了，我們保證立刻地100%全額退款給您。 很多準備參加Cisco Juniper JN0-460 認證考試的考生在網上也許看到了很多網站也線上提供有關Cisco Juniper JN0-460 認證考試的資源。 Goldmile-Infobiz的培訓課程是Goldmile-Infobiz的專家團隊利用自己的知識和經驗為Cisco Fortinet NSE6_SDW_AD-7.6 認證考試而研究出來的。 Microsoft SC-100-KR - 如果你考試失敗，我們會全額退款給你。
Updated: May 28, 2022