雖然Cisco 350-401參考資料認證考試很難，但是通過做Goldmile-Infobiz的練習題後，你會很有信心的參加考試。放心地選擇Goldmile-Infobiz的高效練習題吧，為Cisco 350-401參考資料 認證考試做一個最充分的準備。Goldmile-Infobiz的關於Cisco 350-401參考資料 認證考試的針對性練習題卻是很受歡迎的。 不同的方式是可以達到相同的目的的，就看你選擇什麼樣的方式，走什麼樣的路。很多人都想通過Cisco 350-401參考資料 認證考試來使自己的工作和生活有所提升，但是參加過Cisco 350-401參考資料 認證考試的人都知道通過Cisco 350-401參考資料 認證考試不是很簡單。 通過那些很多已經通過Cisco 350-401參考資料 認證考試的IT專業人員的回饋，他們的成功得益於Goldmile-Infobiz的説明。
CCNP Enterprise 350-401 來吧，你將是未來最棒的IT專家。
CCNP Enterprise 350-401參考資料 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Goldmile-Infobiz是領先于世界的學習資料提供商之一，您可以下載我們最新的PDF版本免費試用作為體驗。 一生輾轉千萬裏，莫問成敗重幾許，得之坦然，失之淡然，與其在別人的輝煌裏仰望，不如親手點亮自己的心燈，揚帆遠航。Goldmile-Infobiz Cisco的350-401 考試大綱考試培訓資料將是你成就輝煌的第一步，有了它，你一定會通過眾多人都覺得艱難無比的Cisco的350-401 考試大綱考試認證，獲得了這個認證，你就可以在你人生中點亮你的心燈，開始你新的旅程，展翅翱翔，成就輝煌人生。
現在IT行业競爭越來越激烈，通過Cisco 350-401參考資料認證考試可以有效的帮助你在现在这个竞争激烈的IT行业中稳固和提升自己的地位。在我們Goldmile-Infobiz中你可以獲得關Cisco 350-401參考資料認證考試的培訓工具。我們Goldmile-Infobiz的IT精英團隊會及時為你提供準確以及詳細的關Cisco 350-401參考資料認證考試的培訓材料。
Cisco 350-401參考資料 - 因為這是你通過考試的最好的，也是唯一的方法。
如果你還在為了通過Cisco 350-401參考資料認證考試苦苦掙扎地奮鬥，此時此刻Goldmile-Infobiz可以給你排憂解難。Goldmile-Infobiz能為你提供品質好的培訓資料來幫助你考試，讓你成為一名優秀的Cisco 350-401參考資料的認證會員。如果你已經決定通過Cisco 350-401參考資料的認證考試來提升自己，那麼選擇我們的Goldmile-Infobiz是不會有錯的。我們的Goldmile-Infobiz能承諾，一定讓你成功地通過你第一次參加的Cisco 350-401參考資料認證考試，拿到Cisco 350-401參考資料認證證來提升和改變自己。
在這裏我想說的就是怎樣才能更有效率地準備350-401參考資料考試，並且一次就通過考試拿到考試的認證資格。Cisco的認證考試現在是很有人氣的考試。
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CIPS L4M6 - 也許在其他的網站或書籍上，你也可以沒瞭解到相關的培訓資料。 Adobe AD0-E725 - 而且所有的考古題都免費提供demo。 如果你選擇了報名參加Cisco Amazon SOA-C02-KR 認證考試，你就應該馬上選擇一份好的學習資料或培訓課程來準備考試。 Goldmile-Infobiz確保廣大考生獲得最好和最新的Cisco Amazon AWS-Certified-Developer-Associate-KR題庫學習資料，您可以隨時隨地的訪問我們網站尋找您需要的考古題。 Cisco IASP SPP 認證考試的考試之前的模擬考試時很有必要的，也是很有效的。
Updated: May 28, 2022