要想一次性通過Cisco 350-401學習指南 認證考試您必須得有一個好的準備和一個完整的知識結構。Goldmile-Infobiz為你提供的資源正好可以完全滿足你的需求。 Goldmile-Infobiz為每個需要通過Cisco的350-401學習指南考試認證的考生提供了一個明確和卓越的解決方案，我們為你提供Cisco的350-401學習指南考試詳細的問題及答案， 我們團隊的IT專家是最有經驗和資格的，我們的考試測試題及答案幾乎和真實得考試一樣，做到這樣的確很了不起，更重要的是我們Goldmile-Infobiz網站在全球範圍內執行這項考試培訓通過率最大。 Cisco 350-401學習指南 認證考試是一個很好的證明自己能力的考試。
CCNP Enterprise 350-401 這個考古題包含了實際考試中一切可能出現的問題。
Goldmile-Infobiz Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)學習指南考試培訓資料是所有的互聯網培訓資源裏最頂尖的培訓資料，我們的知名度度是很高的，這都是許多考生利用了Goldmile-Infobiz Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)學習指南考試培訓資料所得到的成果，如果你也使用我們Goldmile-Infobiz Cisco的350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)學習指南考試培訓資料，我們可以給你100%成功的保障，若是沒有通過，我們將保證退還全部購買費用，為了廣大考生的切身利益，我們Goldmile-Infobiz絕對是信的過的。 即將參加Cisco的350-401 題庫資訊認證考試的你沒有信心通過考試嗎？不用害怕，因為Goldmile-Infobiz可以提供給你最好的資料。Goldmile-Infobiz的350-401 題庫資訊考古題是最新最全面的考試資料，一定可以給你通過考試的勇氣與自信。
人生充滿選擇，選擇不一定給你帶來絕對的幸福，但選擇給了你絕對的機會，而一旦錯過選擇，只能凝望。 Goldmile-Infobiz Cisco的350-401學習指南考試培訓資料是每個IT人士通過IT認證必須的培訓資料，有了這份考試資料就等於手握利刃，所有的考試難題將迎刃而解。 Goldmile-Infobiz Cisco的350-401學習指南考試培訓資料是針對性強，覆蓋面廣，更新快，最完整的培訓資料，有了它，所有的IT認證都不要害怕，你都會順利通過的。
Cisco 350-401學習指南 - 我們的練習題及答案和真實的考試題目很接近。
Goldmile-Infobiz的專家團隊利用他們的經驗和知識終於研究出了關於Cisco 350-401學習指南 認證考試的培訓資料。我們的Cisco 350-401學習指南 認證考試培訓資料很受客戶歡迎，這是Goldmile-Infobiz的專家團隊勤勞勞動的結果。他們研究出來的模擬測試題及答案有很高的品質，和真實的考試題目有95%的相似性，是很值得你依賴的。如果你使用了Goldmile-Infobiz的培訓工具，你可以100%通過你的第一次參加的Cisco 350-401學習指南認證考試。
親愛的廣大考生，你有沒有想過參與任何Cisco的350-401學習指南考試的培訓課程嗎？其實你可以採取措施一次通過認證，Goldmile-Infobiz Cisco的350-401學習指南考試題培訓資料是個不錯的選擇，本站虛擬的網路集訓和使用課程包涵大量你們需要的考題集，完全可以讓你們順利通過認證。
350-401 PDF DEMO:
QUESTION NO: 1
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 5
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
Databricks Databricks-Certified-Professional-Data-Engineer - 我們的目的是不僅僅使你通過IT考試，更希望你能成為一名真正的IT認證專家，為你的求職增加砝碼，獲得與自身技術水準相符的技術崗位，輕鬆的跨入IT白領階層獲取高薪。 Microsoft AZ-120 - 我們Goldmile-Infobiz網站的培訓資料是沒有網站可以與之比較的。 因為我們Goldmile-Infobiz提供給你配置最優質的類比Cisco的Huawei H19-338-ENU的考試考古題，將你一步一步帶入考試準備之中，我們Goldmile-Infobiz提供我們的保證，我們Goldmile-Infobiz Cisco的Huawei H19-338-ENU的考試試題及答案保證你成功。 Cisco 300-610 - 你可以利用你剩下的時間來做更多的事情。 不過，自從有了Goldmile-Infobiz Cisco的The Open Group OGEA-101考試認證培訓資料，那種心態將消失的無蹤無影，因為有了Goldmile-Infobiz Cisco的The Open Group OGEA-101考試認證培訓資料，他們可以信心百倍，不用擔心任何考不過的風險，當然也可以輕鬆自如的面對考試了，這不僅是心理上的幫助，更重要的是通過考試獲得認證，幫助他們拼一個美好的明天。
Updated: May 28, 2022