它覆蓋接近95%的真實問題和答案，快來訪問Goldmile-Infobiz網站，獲取免費的350-401熱門考古題題庫試用版本吧！想要通過350-401熱門考古題認證考試？擔心考試會變體，來嘗試最新版本的題庫學習資料。我們提供的Cisco 350-401熱門考古題考古題準確性高，品質好，是你想通過考試最好的選擇，也是你成功的保障。 這是你輕鬆通過考試的最好的方法。看著這麼多種IT認證考試和這麼多考試資料，你是否感到頭疼了呢？到底要怎麼辦才好呢？要選擇哪種考試哪種資料呢？如果你不知道應該怎麼選擇，那麼我來替你選擇吧。 雖然通過Cisco 350-401熱門考古題認證考試的機率很小，但Goldmile-Infobiz的可靠性可以保證你能通過這個機率小的考試。
CCNP Enterprise 350-401 我們的IT精英團隊的力量會讓你難以置信。
CCNP Enterprise 350-401熱門考古題 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Goldmile-Infobiz是個可以滿足很多客戶的需求的網站。 。Goldmile-Infobiz提供的培訓工具是很有效的，有很多已經通過了一些IT認證考試的人就是用了Goldmile-Infobiz提供的練習題和答案，其中也有通過Cisco 350-401 考試內容認證考試，他們也是利用的Goldmile-Infobiz提供的便利。
現在有許多IT培訓機構都能為你提供Cisco 350-401熱門考古題 認證考試相關的培訓資料，但通常考生通過這些網站得不到詳細的資料。因為他們提供的關於Cisco 350-401熱門考古題 認證考試資料都比較寬泛，不具有針對性，所以吸引不了考生的注意力。
Cisco 350-401熱門考古題 - 如果你考試失敗，我們會全額退款給你。
Goldmile-Infobiz為Cisco 350-401熱門考古題 認證考試準備的培訓包括Cisco 350-401熱門考古題認證考試的模擬測試題和當前考試題。在互聯網上你也可以看到幾個也提供相關的培訓的網站，但是你比較之後，你就會發現Goldmile-Infobiz的關於Cisco 350-401熱門考古題 認證考試的培訓比較有針對性，不僅品質是最高的，而且內容是最全面的。
我們Goldmile-Infobiz Cisco的350-401熱門考古題考試的試題及答案，為你提供了一切你所需要的考前準備資料，關於Cisco的350-401熱門考古題考試，你可以從不同的網站或書籍找到這些問題，但關鍵是邏輯性相連，我們的試題及答案不僅能第一次毫不費力的通過考試，同時也能節省你寶貴的時間。
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Salesforce Health-Cloud-Accredited-Professional - 適當的選擇培訓是成功的保證，但是選擇是相當重要的，Goldmile-Infobiz的知名度眾所周知，沒有理由不選擇它。 如果你發現我們IBM C1000-179有任何品質問題或者沒有考過，我們將無條件全額退款，Goldmile-Infobiz是專業提供Cisco的IBM C1000-179最新考題和答案的網站，幾乎全部覆蓋了IBM C1000-179全部的知識點.。 Microsoft GH-200考試是IT行業的當中一個新的轉捩點，你將成為IT行業的專業高端人士，隨著資訊技術的普及和進步，你們會看到有數以計百的線上資源，提供Cisco的Microsoft GH-200考題和答案，而Goldmile-Infobiz卻遙遙領先，人們選擇Goldmile-Infobiz是因為Goldmile-Infobiz的Cisco的Microsoft GH-200考試培訓資料真的可以給人們帶來好處，能幫助你早日實現你的夢想！ Oracle 1z0-1054-25 - 有了我們Goldmile-Infobiz的提供的高品質高品質的培訓資料，保證你通過考試，給你準備一個光明的未來。 如果你仍然在努力學習為通過Cisco的Huawei H12-411_V2.0考試認證，我們Goldmile-Infobiz為你實現你的夢想。
Updated: May 28, 2022