希望成為擁有350-401熱門認證認證的IT專業人士嗎？想減少獲得350-401熱門認證認證的成本嗎？想通過所有的Cisco認證嗎？如果“是”，Goldmile-Infobiz是考生最明智的選擇，為您提供涵蓋最新認證考試問題的最佳題庫學習資料。350-401熱門認證題庫可以在您考前模擬真實的考試環境，也是最有效的考古題。利用Cisco的350-401熱門認證考古題，您將達到你的目的，得到最佳的效果，給您帶來無限大的利益，在您以后的IT行業道路上可以走的更遠。 Goldmile-Infobiz針對不同的考生有不同的培訓方法和不同的培訓課程。有了Goldmile-Infobiz提供的這些針對性的培訓，考生通過相關考試就容易得多。 我們的IT精英團隊的力量會讓你難以置信。
CCNP Enterprise 350-401 如果你考試失敗，我們會全額退款給你。
Goldmile-Infobiz為Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)熱門認證 認證考試準備的培訓包括Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)熱門認證認證考試的模擬測試題和當前考試題。 我們Goldmile-Infobiz Cisco的新版 350-401 題庫上線考試的試題及答案，為你提供了一切你所需要的考前準備資料，關於Cisco的新版 350-401 題庫上線考試，你可以從不同的網站或書籍找到這些問題，但關鍵是邏輯性相連，我們的試題及答案不僅能第一次毫不費力的通過考試，同時也能節省你寶貴的時間。
適當的選擇培訓是成功的保證，但是選擇是相當重要的，Goldmile-Infobiz的知名度眾所周知，沒有理由不選擇它。當然，如果涉及到完善的培訓資料給你，如果你不適用那也是沒有效果的，所以在利用我們Goldmile-Infobiz的培訓資料之前，你可以先下載部分免費試題及答案作為試用，這樣你可以做好最真實的考試準備，以便輕鬆自如的應對測試，這也是為什麼成千上萬的考生依賴我們Goldmile-Infobiz的重要原因之一，我們提供的是最好最實惠最完整的考試培訓資料，以至於幫助他們順利通過測試。
Cisco 350-401熱門認證 - Cisco的認證資格也變得越來越重要。
所有的IT職員都知道，IT認證考試的資格是不容易拿到的。但是，參加IT認證考試獲得資格又是提升自己能力以及更好地證明自己的價值的途徑，所以不得不選擇。那麼，難道沒有一個簡單的方法可以讓大家更容易地通過IT認證考試嗎？當然有了。Goldmile-Infobiz的考古題就是一個最好的方法。Goldmile-Infobiz有你需要的所有資料，絕對可以滿足你的要求。你可以到Goldmile-Infobiz的网站了解更多的信息，找到你想要的考试资料。
為了讓你可以確認考古題的品質，以及你是不是適合這個考古題，Goldmile-Infobiz的考古題的兩種版本都提供免費的部分下載。我們將一部分的試題免費提供給你，你可以在Goldmile-Infobiz的網站上搜索下載。
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
我們的專家為你即將到來的考試提供學習資源，不僅僅在于學習， 更在于如何通過SAP C_S4CPB_2508考試。 Cisco 200-301-KR - 如果你想順利通過你的IT考試嗎，那麼你完全有必要使用Goldmile-Infobiz的考古題。 有了Cisco APICS CSCP-KR認證考試的證書就相當於人生有了個新的里程牌，工作將會有很大的提升，相信作為IT行業人士的每個人都很想擁有吧。 我們將為您提供最新的Cisco Juniper JN0-460題庫資料來準備考試，所有的題庫都可以在這里獲得，使通過Juniper JN0-460考試變得更加容易。 Huawei H19-455_V1.0 - 報名參加考試的人越來越多，並且能通過這個認證考試也是那些雄心勃勃的IT專業人士的夢想。
Updated: May 28, 2022