如果你要購買我們的Cisco的350-401考試指南考題資料，Goldmile-Infobiz將提供最好的服務和最優質得的品質，我們的認證考試軟體已經取得了廠商和第三方的授權，並且擁有大量的IT業的專業及技術專家，根據客戶的需求，根據大綱開發出的一系列產品，以保證客戶的最大需求，Cisco的350-401考試指南考試認證資料具有最高的專業技術含量，可以作為相關知識的專家和學者學習和研究之用，我們提供所有的產品都有部分免費試用，在你購買之前以保證你考試的品質及適用性。 因為如果錯過了它，你就等於錯失了一次成功的機會。Goldmile-Infobiz不僅為你提供優秀的資料，而且還為你提供優質的服務。 我們Goldmile-Infobiz Cisco的350-401考試指南考試學習指南可以成為你職業生涯中的燈塔，因為它包含了一切需要通過的350-401考試指南考試，選擇我們Goldmile-Infobiz，可以幫助你通過考試，這是個絕對明智的決定，因為它可以讓你從那些可怕的研究中走出來，Goldmile-Infobiz就是你的幫手，你可以得到雙倍的結果，只需要付出一半的努力。
對於 Cisco的350-401考試指南考試認證每個考生都很迷茫。
保證大家通過350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR)考試指南認證考試，如果您失敗，可以享受 100%的退款保證。 目前Cisco的350-401 通過考試認證考試真的是一門人氣很高的考試。還沒有取得這個考試的認證資格的你，是不是也想參加考試呢？確實，這是一門很難的考試。
成千上萬的IT考生通過使用我們的產品成功通過考試，Cisco 350-401考試指南考古題質量被廣大考試測試其是高品質的。我們從來不相信第二次機會，因此給您帶來的最好的Cisco 350-401考試指南考古題幫助您首次就通過考試，并取得不錯的成績。Goldmile-Infobiz網站幫助考生通過350-401考試指南考試獲得認證，不僅可以節約很多時間，還能得到輕松通過350-401考試指南考試的保證，這是IT認證考試中最重要的考試之一。
Cisco 350-401考試指南 - 那麼，應該怎麼辦才好呢？沒關係。
如果你還在為了通過 Cisco 350-401考試指南 花大量的寶貴時間和精力拼命地惡補知識，同時也不知道怎麼選擇一個更有效的捷徑來通過Cisco 350-401考試指南認證考試。現在Goldmile-Infobiz為你提供一個有效的通過Cisco 350-401考試指南認證考試的方法，會讓你感覺起到事半功倍的效果。
您是否感興趣想通過350-401考試指南考試，然后開始您的高薪工作？Goldmile-Infobiz擁有最新研發的題庫問題及答案，可以幫助數百萬的考生通過350-401考試指南考試并獲得認證。我們提供給您最高品質的Cisco 350-401考試指南題庫問題及答案，覆蓋面廣，可以幫助考生進行有效的考前學習。
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
你可以現在網上免費下載我們Goldmile-Infobiz為你提供的部分Cisco SAP C_THR81_2505認證考試的考試練習題和答案。 不要因為準備Cisco Microsoft SC-100-KR而浪費過多時間，可以使用Goldmile-Infobiz網站提供的考古題資料，幫助您更有效率的準備Microsoft SC-100-KR考試。 參加Cisco Salesforce Sales-101 認證考試的考生請選擇Goldmile-Infobiz為你提供的考試練習題和答案，因為它是你的最佳選擇。 擁有Cisco WGU Information-Technology-Management認證考試證書可以幫助在IT領域找工作的人獲得更好的就業機會，也將會為成功的IT事業做好鋪墊。 如果你參加Cisco Microsoft AZ-104認證考試，你選擇Goldmile-Infobiz就是選擇成功！祝你好運。
Updated: May 28, 2022