350-401認證考試解析考試是IT行業的當中一個新的轉捩點，你將成為IT行業的專業高端人士，隨著資訊技術的普及和進步，你們會看到有數以計百的線上資源，提供Cisco的350-401認證考試解析考題和答案，而Goldmile-Infobiz卻遙遙領先，人們選擇Goldmile-Infobiz是因為Goldmile-Infobiz的Cisco的350-401認證考試解析考試培訓資料真的可以給人們帶來好處，能幫助你早日實現你的夢想！ 我們Goldmile-Infobiz Cisco的350-401認證考試解析考試認證培訓資料可以實現你的夢想，因為它包含了一切需要通過的Cisco的350-401認證考試解析考試認證，有了Goldmile-Infobiz，你們將風雨無阻，全身心投入應戰。有了我們Goldmile-Infobiz的提供的高品質高品質的培訓資料，保證你通過考試，給你準備一個光明的未來。 如果你仍然在努力學習為通過Cisco的350-401認證考試解析考試認證，我們Goldmile-Infobiz為你實現你的夢想。
CCNP Enterprise 350-401 Goldmile-Infobiz是可以帶你通往成功之路的網站。
CCNP Enterprise 350-401認證考試解析 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) 有了Goldmile-Infobiz你的職業生涯將有所改變，你可以順利地在IT行業中推廣自己。 Goldmile-Infobiz的線上培訓有著多年的經驗，可以為參加Cisco 350-401 最新考證 認證考試的考生提供高品質的學習資料，來能滿足考生的所有需求。在如今互聯網如此發達社會裏，選擇線上培訓已經是很普遍的現象。
有了Goldmile-Infobiz為你提供的精確的Cisco 350-401認證考試解析認證考試的練習題和答案，你可以以高分通過Cisco 350-401認證考試解析認證考試。Goldmile-Infobiz是一個可以成就很多IT人士的夢想的網站。Goldmile-Infobiz能為參加IT相關認證考試的考生提供他們想要的資料來助幫助他們通過考試。
現在，Cisco的Cisco 350-401認證考試解析考試就是一個非常受歡迎的考試。
Cisco的350-401認證考試解析考試是IT行業之中既流行也非常重要的一個考試，我們準備了最優質的學習指南和最佳的線上服務，特意為IT專業人士提供捷徑，Goldmile-Infobiz Cisco的350-401認證考試解析考題涵蓋了所有你需要知道的考試內容和答案，如果你通過我們Goldmile-Infobiz的考題模擬，你就知道這才是你千方百計想得到的東西，並且認為這樣才真的是為考試做準備的
你對Goldmile-Infobiz瞭解多少呢？你有沒有用過Goldmile-Infobiz的IT考試考古題，或者你有沒有聽到周圍的人提到過Goldmile-Infobiz的考試資料呢？作為IT認證考試的相關資料的專業提供者，Goldmile-Infobiz肯定是你見過的最好的網站。為什麼可以這麼肯定呢？因為再沒有像Goldmile-Infobiz這樣的網站，既可以提供給你最好的資料保證你通過考試，又可以提供給你最優質的服務，讓你100%地滿意。
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
我們Goldmile-Infobiz Cisco的IBM C1000-204考試認證考古題，可以幫助你實現你的理想，我們Goldmile-Infobiz Cisco的IBM C1000-204考試是由高度認證的IT專業人士在該領域的經驗的集合與創新，我們的產品將讓你嘗試所有可能的問題，我們可以給你保證，確保考生得到深入探討問題00%真實的答案。 你可以先從通過Workday Workday-Pro-Compensation認證考試開始，因為這是Cisco的一個非常重要的考試。 Goldmile-Infobiz Cisco的CIPS L5M1考試培訓資料是由考生在類比的情況下學習，你可以控制題型和一些問題以及每個測試的時間，在Goldmile-Infobiz網站裏，你可以沒有壓力和焦慮來準備考試，同時也可以避免一些常見的錯誤，這樣你會獲得信心，在實際測試時能重複你的經驗，你將涵蓋各個領域和類別的微軟技術，幫助你成功的獲得認證。 如果你正在為如何通過Amazon SAP-C02考試而煩惱，這是沒有必要，通過最新的考試要點來提供覆蓋率很廣的Cisco Amazon SAP-C02擬真試題，幫助考生做好充足的考前準備。 如果你想在短時間內，以最小的努力，達到最有效果的結果Cisco的Scrum SAFe-Practitioner考試準備，你可以使用Goldmile-Infobiz Cisco的Scrum SAFe-Practitioner考試培訓資料，Goldmile-Infobiz的培訓資料是通過實踐檢驗了的，也是通過眾多考生證明了它確實可以百分百通過考試，利用了它，你將達到你的目的，得到最佳的效果。
Updated: May 28, 2022