Um der Anforderung des aktuellen realen Test gerecht zu werden, aktualisiert das Technik-Team rechtzeitig die Fragen und Antworten zur Cisco 200-301 Testantworten Zertifizierungsprüfung. Wir akzeptieren immer Rückmeldungen von Benutzern und nehmen viele ihre Vorschläge an, was zu einer perfekten Schulungsmaterialien zur Cisco 200-301 Testantworten-Prüfung. Dies ermöglicht Goldmile-Infobiz, immer Produkte von bester Qualität zu besitzen. Sie können im Internet kostenlos die Software und Prüfungsfragen und Antworten zur Cisco 200-301 Testantworten Zertifizierungsprüfung als Probe herunterladen. Goldmile-Infobiz wird Ihnen helfen, die Cisco 200-301 Testantworten Zertifizierungsprüfung zu bestehen. Sie ist wichtiger als je zuvor in der konkurrenzfähigen Geseschaft.
CCNA 200-301 Sicher haben Sie viele Wahlen.
Kaufen Sie alle unsere Materialien und wir versprechen Ihnen, dass Sie Ihre erste Cisco 200-301 - Cisco Certified Network Associate Exam Testantworten Zertifizierungsprüfung bestehen können. Wenn Sie sich um die Cisco 200-301 Zertifikatsfragen Zertifizierungsprüfung bemühen, kann Goldmile-Infobiz Ihnen helfen, Ihren Traum zu erfüllen. Die Übungen zur Cisco 200-301 Zertifikatsfragen Zertifizierungsprüfung werden von der Praxis prüft.
Mit Cisco 200-301 Testantworten Zertifikat können Sie Ihre Berufsaussichten verbessern und viele neue Chancen erschließen. Goldmile-Infobiz ist eine geeignete Website für die Kandidaten, die sich an der Cisco 200-301 Testantworten Zertifizierungsprüfung beteiligen. Es wird nicht nur alle Informationen zur Cisco 200-301 Testantworten Zertifizierungsprüfung, sondern Ihnen auch eine gute Lernchance bieten.
Cisco 200-301 Testantworten - Dieses Leben ist wirklich langweilig.
Mit der Hilfe von Goldmile-Infobiz brauchen Sie nicht so viel Geld für die Kurse oder viel Zeit und Energie für die Prüfung auszugeben. Sie können ganz einfach die Prüfung erfolgreich ablegen. Die Software zur Cisco 200-301 Testantworten Zertifizierungsprüfung wird Goldmile-Infobiz nach den echten Prüfungen in den letzten Jahren erforscht. Die Fragen und Antworten zur Cisco 200-301 Testantworten Zertifizierungsprüfung von Goldmile-Infobiz sind den realen Fragen und Antworten sehr ähnlich.
Aber für alle ist die Prüfung schwer. Die Cisco 200-301 Testantworten-Prüfung ist eine schwierige Zertifizierung.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Die Cisco Amazon SAP-C02-KR Zertifizierungsprüfung ist eine Prüfung von hohem Goldgehalt. Die Demo der Cisco PMI CAPM-German Software können Sie auf unsere Webseite Goldmile-Infobiz einfach herunterladen. Cisco 350-501 - Goldmile-Infobiz verprechen, dass Sie zum ersten Mal die Zertifizierung von Cisco erhalten MB7 -838 Prüfung können. Die komplizierte Sammlung und Ordnung der Prüfungsunterlagen der Cisco EC-COUNCIL 712-50 werden von unserer professionellen Gruppen fertiggemacht. USGBC LEED-Green-Associate-KR - Unser Goldmile-Infobiz verspricht, dass Sie nur einmal die Prüfung bestehen und das Zertifikat von den Experten bekommen können.
Updated: May 28, 2022