Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success. If you buy Goldmile-Infobiz Microsoft AZ-220 100 Accuracy exam training materials, you will solve the problem of your test preparation. Just have a try and you will love our AZ-220 100 Accuracy exam questions. If we want to survive in this competitive world, we need a comprehensive development plan to adapt to the requirement of modern enterprises. Then, do you have obtained Microsoft AZ-220 100 Accuracy certificate which is very popular? How much do you know about AZ-220 100 Accuracy test? If you want to pass AZ-220 100 Accuracy exam without enough exam related knowledge, how should you do? But don't you worry: Goldmile-Infobiz will give assistance to you.
Our AZ-220 100 Accuracy exam questions are often in short supply.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 100 Accuracy - Microsoft Azure IoT Developer Office workers and mothers are very busy at work and home; students may have studies or other things. If you are satisfied with our AZ-220 Valid Exam Vce training guide, come to choose and purchase. If you buy the Software or the APP online version of our AZ-220 Valid Exam Vce study materials, you will find that the timer can aid you control the time.
Thus most of the questions are repeated in exams and our experts after studying the previous exam have sorted out the most important questions and prepared dumps out of them. Hence AZ-220 100 Accuracy dumps are a special feast for all the exam takers and sure to bring them not only AZ-220 100 Accuracy exam success but also maximum score. Goldmile-Infobiz's braindumps provide you the gist of the entire syllabus in a specific set of questions and answers.
Microsoft AZ-220 100 Accuracy - Then they will receive our mails in 5-10 minutes.
As we all know, AZ-220 100 Accuracy certificates are an essential part of one’s resume, which can make your resume more prominent than others, making it easier for you to get the job you want. For example, the social acceptance of AZ-220 100 Accuracy certification now is higher and higher. If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our AZ-220 100 Accuracy training materials.
Our AZ-220 100 Accuracy learning prep will live up to your expectations. It will be your great loss to miss our AZ-220 100 Accuracy practice engine.
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
We have brought in an experienced team of experts to develop our CIPS L5M7 study materials, which are close to the exam syllabus. Many people have benefited from learning our Salesforce Rev-Con-201 learning braindumps. Not only will we fully consider for customers before and during the purchase on our SAP C_BCBTM_2502 practice guide, but we will also provide you with warm and thoughtful service on the SAP C_BCBTM_2502 training guide. If people buy and use the SAP C_SIGVT_2506 study tool with bad quality to prepare for their exams, it must do more harm than good for their exams, thus it can be seen that the good and suitable SAP C_SIGVT_2506guide question is so important for people’ exam that people have to pay more attention to the study materials. As we have three different kinds of the Fortinet NSE8_812 practice braindumps, accordingly we have three kinds of the free demos as well.
Updated: May 28, 2022