A generally accepted view on society is only the professionals engaged in professionally work, and so on, only professional in accordance with professional standards of study materials, as our Cisco Certified Network Associate Exam study questions, to bring more professional quality service for the user. Our study materials can give the user confidence and strongly rely on feeling, lets the user in the reference appendix not alone on the road, because we are to accompany the examinee on 200-301 Answers exam, candidates need to not only learning content of teaching, but also share his arduous difficult helper, so believe us, we are so professional company. 200-301 Answers practice materials are typically seen as the tools of reviving, practicing and remembering necessary exam questions for the exam, spending much time on them you may improve the chance of winning. However, our 200-301 Answers training materials can offer better condition than traditional practice materials and can be used effectively. You can free download the demos of our 200-301 Answers study guide to check our high quality.
CCNA 200-301 They can be obtained within five minutes.
As a result, many customers get manifest improvement and lighten their load by using our 200-301 - Cisco Certified Network Associate Exam Answers latest dumps. All exam materials in 200-301 Latest Test Camp learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods.
The second one of 200-301 Answers test guide is emphasis on difficult and hard-to-understand points. Experts left notes for your reference, and we believe with their notes things will be easier. In addition, the new supplementary will be sent to your mailbox if you place order this time with beneficial discounts at intervals.
Cisco 200-301 Answers - God will help those who help themselves.
Can you imagine that you only need to review twenty hours to successfully obtain the 200-301 Answers certification? Can you imagine that you don’t have to stay up late to learn and get your boss’s favor? With 200-301 Answers study quiz, passing exams is no longer a dream. If you are an office worker, 200-301 Answers preparation questions can help you make better use of the scattered time to review. Just visit our website and try our 200-301 Answers exam questions, then you will find what you need.
Do not reject learning new things. Maybe your life will be changed a lot after learning our 200-301 Answers training questions.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Amazon SAA-C03-KR - Our study materials will give you a benefit as Thanks, we do it all for the benefits of the user. We believe our study materials will be very useful and helpful for all people who are going to prepare for the Microsoft SC-900 exam. You are not required to pay any amount or getting registered with us for downloading free Amazon AWS-Certified-Developer-Associate-KR materials. Genesys GCP-GCX - Of course, if you choose our study materials, you will have the chance to experience our PDF version. WGU Information-Technology-Management - If you haven't found the right materials yet, please don't worry.
Updated: May 28, 2022