It is our aspiration to help candidates get certification in their first try with our latest 200-301 Cram exam prep and valid pass guide. We know the difficulty of 200-301 Cram real exam so our IT experts written the best quality exam answers for our customers who didn't get good result. By using our 200-301 Cram pass review, you will grasp the overall key points of the test content and solve the difficult questions easier. Besides, our 200-301 Cram exam questions will help you pass the exam and get the certification for sure. You will face plenty of options in your whole lives. You do not need to run the risk of losing money in case of failure of 200-301 Cram test.
CCNA 200-301 In every area, timing counts importantly.
CCNA 200-301 Cram - Cisco Certified Network Associate Exam If you are an IT staff, it will be your indispensable training materials. People who can contact with your name, e-mail, telephone number are all members of the internal corporate. The privacy information provided by you only can be used in online support services and providing professional staff remote assistance.
At present, Cisco 200-301 Cram exam is very popular. Do you want to get Cisco 200-301 Cram certificate? If it is ok, don't hesitate to sign up for the exam. And don't worry about how to pass the test, Goldmile-Infobiz certification training will be with you.
Cisco 200-301 Cram - This is doubly true for IT field.
Customer first, service first is our principle of service. If you buy our 200-301 Cram study guide, you will find our after sale service is so considerate for you. We are glad to meet your all demands and answer your all question about our 200-301 Cram training materials. So do not hesitate and buy our 200-301 Cram study guide, we believe you will find surprise from our products. you should have the right to enjoy the perfect after sale service and the high quality products!
Goldmile-Infobiz pdf real questions and answers can prevent you from wasting lots of time and efforts on preparing for the exam and can help you sail through you exam with ease and high efficiency. But even you fail the exam, we assure we will give you FULL REFUND.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Linux Foundation PCA - The data showed that our high pass rate is unbelievably 98% to 100%. There will be one version right for you and help you quickly pass the Microsoft AZ-104 with ease, so that you can obtain the most authoritative international recognition on your IT ability. We know that the standard for most workers become higher and higher; so we also set higher goal on our SAP C-S4CS-2508 guide questions. The latest Fortinet FCP_GCS_AD-7.6 exam review materials offered by our Goldmile-Infobiz will help you complete the Fortinet FCP_GCS_AD-7.6 exam preparation in short time. If you want to have a better understanding of our PECB ISO-9001-Lead-Auditor exam braindumps, just come and have a try!
Updated: May 28, 2022