And we will give you one year's free update of the exam study materials you purchase and 24/7 online service. Now just make up your mind and get your 200-301 Discount exam dumps! You don't need to worry about wasting your precious time but failing to get the 200-301 Discount certification. And we can claim that if you study our 200-301 Discount study materials for 20 to 30 hours, you can pass the exam for sure. As the famous saying goes, time is life. The client can try out and download our 200-301 Discount training materials freely before their purchase so as to have an understanding of our product and then decide whether to buy them or not.
CCNA 200-301 No one is willing to buy a defective product.
CCNA 200-301 Discount - Cisco Certified Network Associate Exam In order to provide you with the best IT certification exam dumps forever, Goldmile-Infobiz constantly improve the quality of exam dumps and update the dumps on the basis of the latest test syllabus at any time. Also, it will display how many questions of the New 200-301 Test Price exam questions you do correctly and mistakenly. In a word, you can compensate for your weakness and change a correct review plan of the study materials.
The one is PDF version and another is SOFT version. You can experience it in advance. In this, you can check its quality for yourself.
Cisco 200-301 Discount - Never feel sorry to invest yourself.
Where there is a will, there is a way. As long as you never give up yourself, you are bound to become successful. We hope that our 200-301 Discount exam materials can light your life. People always make excuses for their laziness. It is time to refresh again. You will witness your positive changes after completing learning our 200-301 Discount study guide. Not only that you can learn more useful and latest professional knowledge, but also you can get the 200-301 Discount certification to have a better career.
To choose us is to choose success! It is an incredible opportunity among all candidates fighting for the desirable exam outcome to have our 200-301 Discount practice materials.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
So you need our timer to help you on Microsoft AZ-900 practice guide. There is a large range of APICS CSCP-KR certifications that can help you improve your professional worth and make your dreams come true. Salesforce Sales-101 - While the product of Goldmile-Infobiz is a good guarantee of the resource of information. At present we will provide all candidates who want to pass the Microsoft AI-900-CN exam with three different versions for your choice. Palo Alto Networks NetSec-Analyst - Once you decide to select Goldmile-Infobiz, Goldmile-Infobiz will make every effort to help you pass the exam.
Updated: May 28, 2022