The series of 200-301 Dump measures we have taken is also to allow you to have the most professional products and the most professional services. I believe that in addition to our 200-301 Dump exam questions, you have also used a variety of products. We believe if you compare our 200-301 Dump training guide with the others, you will choose ours at once. Goldmile-Infobiz will be the first time to provide you with exam information and exam practice questions and answers to let you be fully prepared to ensure 100% to pass Cisco certification 200-301 Dump exam. Goldmile-Infobiz can not only allow you for the first time to participate in the Cisco certification 200-301 Dump exam to pass it successfully, but also help you save a lot of valuable time. Closed cars will not improve, and when we are reviewing our qualifying examinations, we should also pay attention to the overall layout of various qualifying examinations.
CCNA 200-301 Sharp tools make good work.
200-301 - Cisco Certified Network Associate Exam Dump exam guide has a first-class service team to provide you with 24-hour efficient online services. Our 200-301 Valid Study Questions Pdf free dumps are applied to all level of candidates and ensure you get high passing score in their first try. Our 200-301 Valid Study Questions Pdf vce braindumps will boost your confidence for taking the actual test because the pass rate of our preparation materials almost reach to 98%.
Finding a good paying job is available for you. Good chances are few. Please follow your heart.
Cisco 200-301 Dump - Please pay more attention to our website.
Our 200-301 Dump test braindumps are in the leading position in the editorial market, and our advanced operating system for 200-301 Dump latest exam torrent has won wide recognition. As long as you choose our 200-301 Dump exam questions and pay successfully, you do not have to worry about receiving our learning materials for a long time. We assure you that you only need to wait 5-10 minutes and you will receive our 200-301 Dump exam questions which are sent by our system. When you start learning, you will find a lot of small buttons, which are designed carefully. You can choose different ways of operation according to your learning habits to help you learn effectively.
The site of Goldmile-Infobiz is well-known on a global scale. Because the training materials it provides to the IT industry have no-limited applicability.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
It is understandable that different people have different preference in terms of Cisco 200-301 study guide. CMAA Construction-Manager - Of course, with studying hard, you can pass the exam. You can visit the pages of the product and then know the version of the product, the updated time, the quantity of the questions and answers, the characteristics and merits of the Microsoft MB-700 test braindumps, the price of the product and the discount. If you are concerned about the test, however, you can choose Goldmile-Infobiz's Cisco Microsoft PL-900-KR exam training materials. Esri EGMP_2025 - The procedure of refund is very simple.
Updated: May 28, 2022