With all the questons and answers of our 200-301 Duration study materials, your success is 100% guaranteed. Moreover, we have Demos as freebies. The free demos give you a prove-evident and educated guess about the content of our 200-301 Duration practice questions. We are aware that the IT industry is a new industry. It is one of the chain to drive economic development. According to your need, you can choose the most suitable version of our Cisco Certified Network Associate Exam guide torrent for yourself.
CCNA 200-301 What should we do? It doesn't matter.
Even if you have a week foundation, I believe that you will get the certification by using our 200-301 - Cisco Certified Network Associate Exam Duration study materials. To prepare for 200-301 Valid Exam Dumps exam, you do not need read a pile of reference books or take more time to join in related training courses, what you need to do is to make use of our Goldmile-Infobiz exam software, and you can pass the exam with ease. Our exam dumps can not only help you reduce your pressure from 200-301 Valid Exam Dumps exam preparation, but also eliminate your worry about money waste.
Just be confident to face new challenge! As the old saying tells that, he who doesn't go advance will lose his ground. So you will have a positive outlook on life.
Cisco 200-301 Duration - So we understand your worries.
Goldmile-Infobiz can satisfy the fundamental demands of candidates with concise layout and illegible outline of our 200-301 Duration exam questions. We have three versions of 200-301 Duration study materials: the PDF, the Software and APP online and they are made for different habits and preference of you, Our PDF version of 200-301 Duration practice engine is suitable for reading and printing requests. And i love this version most also because that it is easy to take with and convenient to make notes on it.
At the moment when you decided to choose our 200-301 Duration real dumps, we feel the responsibility to be with you during your journey to prepare for the 200-301 Duration exam. So we clearly understand our duty to offer help in this area.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Microsoft MS-700 - And we will give some discounts from time to time. Huawei H13-921_V1.5 - Frankly speaking, it is a common phenomenon that we cannot dare to have a try for something that we have little knowledge of or we never use. SAP C_BCBAI_2509 - They are unsuspecting experts who you can count on. And you can be satisfied with our SAP C-S4PM2-2507 learning guide. So CertNexus AIP-210 exam dumps are definitely valuable acquisitions.
Updated: May 28, 2022