When we are in some kind of learning web site, often feel dazzling, because web page design is not reasonable, put too much information all rush, it will appear desultorily. Absorbing the lessons of the 200-301 Exams test prep, will be all kinds of qualification examination classify layout, at the same time on the front page of the 200-301 Exams test materials have clear test module classification, so clear page design greatly convenient for the users, can let users in a very short period of time to find what they want to study, and then targeted to study. Saving the precious time users already so, also makes the 200-301 Exams quiz torrent look more rich, powerful strengthened the practicability of the products, to meet the needs of more users, to make the 200-301 Exams test prep stand out in many similar products. With our users all over the world, you really should believe in the choices of so many people. Our advantage is very obvious. Passing the 200-301 Exams and obtaining the certificate may be the fastest and most direct way to change your position and achieve your goal.
200-301 Exams study materials have a 99% pass rate.
CCNA 200-301 Exams - Cisco Certified Network Associate Exam You can totally relay on us. Then you will know whether it is suitable for you to use our New 200-301 Test Testking test questions. There are answers and questions provided to give an explicit explanation.
Second, it is convenient for you to read and make notes with our versions of 200-301 Exams exam materials. Last but not least, we will provide considerate on line after sale service for you in twenty four hours a day, seven days a week. So let our 200-301 Exams practice guide to be your learning partner in the course of preparing for the exam, it will be a wise choice for you to choose our 200-301 Exams study dumps.
Cisco 200-301 Exams - After all, no one can steal your knowledge.
All the IT professionals are familiar with the Cisco 200-301 Exams exam. And all of you dream of owning the most demanding certification. So that you can get the career you want, and can achieve your dreams. With Goldmile-Infobiz's Cisco 200-301 Exams exam training materials, you can get what you want.
We believe that the trial version will help you a lot. If you are not certain whether the 200-301 Exams prep guide from our company is suitable for you or not, so you are hesitate to buy and use our study materials.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Fortinet FCSS_LED_AR-7.6 - Goldmile-Infobiz not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service. VMware 2V0-13.25 - If you have the Cisco certification, it will be very easy for you to get a promotion. Peoplecert DevOps-Foundation - After you use it, you will find that everything we have said is true. And our Huawei H13-324_V2.0 learning guide will be your best choice. Amazon SAP-C02 - Missing the chance, I am sure you must regret it.
Updated: May 28, 2022