By focusing on how to help you more effectively, we encourage exam candidates to buy our 200-301 Explanation study braindumps with high passing rate up to 98 to 100 percent all these years. Our experts designed three versions for you rather than simply congregate points of questions into 200-301 Explanation real questions. Efforts conducted in an effort to relieve you of any losses or stress. As most of the people tend to use express delivery to save time, our 200-301 Explanation preparation exam will be sent out within 5-10 minutes after purchasing. As long as you pay at our platform, we will deliver the relevant 200-301 Explanation exam materials to your mailbox within the given time. The team of experts hired by Cisco Certified Network Associate Exam study questions constantly updates and supplements the contents of study materials according to the latest syllabus and the latest industry research results.
CCNA 200-301 You still can pass the exam with our help.
Don't need a lot of time and money, only 30 hours of special training, and you can easily pass your first time to attend Cisco certification 200-301 - Cisco Certified Network Associate Exam Explanation exam. And you can free download the demos of the Interactive 200-301 Practice Exam practice engine to have a experience before payment. During the operation of the Interactive 200-301 Practice Exam study materials on your computers, the running systems of the Interactive 200-301 Practice Exam study guide will be flexible, which saves you a lot of troubles and help you concentrate on study.
Cisco certification 200-301 Explanation exam has become a very popular test in the IT industry, but in order to pass the exam you need to spend a lot of time and effort to master relevant IT professional knowledge. In such a time is so precious society, time is money. Goldmile-Infobiz provide a training scheme for Cisco certification 200-301 Explanation exam, which only needs 20 hours to complete and can help you well consolidate the related IT professional knowledge to let you have a good preparation for your first time to participate in Cisco certification 200-301 Explanation exam.
Cisco 200-301 Explanation - It is the best training materials.
You can imagine that you just need to pay a little money for our 200-301 Explanation exam prep, what you acquire is priceless. So it equals that you have made a worthwhile investment. Firstly, you will learn many useful knowledge and skills from our 200-301 Explanation exam guide, which is a valuable asset in your life. After all, no one can steal your knowledge. In addition, you can get the valuable 200-301 Explanation certificate.
So that you can get the career you want, and can achieve your dreams. With Goldmile-Infobiz's Cisco 200-301 Explanation exam training materials, you can get what you want.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
Huawei H12-811_V1.0-ENU - We believe that the trial version will help you a lot. Network Appliance NS0-076 - Goldmile-Infobiz not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service. Cyber AB CMMC-CCP - If you have the Cisco certification, it will be very easy for you to get a promotion. Microsoft MS-700 - After you use it, you will find that everything we have said is true. And our Microsoft MS-700 learning guide will be your best choice.
Updated: May 28, 2022