All are orderly arranged in our practice materials. After all high-quality demos rest with high quality 200-301 Free practice materials, you can feel relieved with help from then. We offer free demos as your experimental tryout before downloading our real 200-301 Free practice materials. If you have any difficulty in choosing the correct 200-301 Free study braindumps, here comes a piece of good news for you. The 200-301 Free prep guide designed by a lot of experts and professors from company are very useful for all people to pass the practice exam and help them get the Cisco certification in the shortest time. We ensure that you will satisfy our study materials.
CCNA 200-301 So our customers can pass the exam with ease.
You have Goldmile-Infobiz Cisco 200-301 - Cisco Certified Network Associate Exam Free certification exam training materials, the same as having a bright future. Therefore, we have provided three versions of 200-301 Test Experience practice guide: the PDF, the Software and the APP online. You can choose according to your actual situation.
Because Goldmile-Infobiz's Cisco 200-301 Free exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. Goldmile-Infobiz's Cisco 200-301 Free exam training materials is the best medicine for candidates.
Cisco 200-301 Free - In order to success, don't miss Goldmile-Infobiz.
Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our 200-301 Free learning guide in the international market, thus there are three different versions of our 200-301 Free exam materials which are prepared to cater the different demands of various people. It is worth mentioning that, the simulation test is available in our software version. With the simulation test, all of our customers will get accustomed to the 200-301 Free exam easily, and get rid of bad habits, which may influence your performance in the real 200-301 Free exam. In addition, the mode of 200-301 Free learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 200-301 Free test questions would be absorbed, which is time-saving and high-efficient.
This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully. Certainly you have heard of Goldmile-Infobiz Cisco 200-301 Free dumps.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
High efficiency service has won reputation for us among multitude of customers, so choosing our Medical Tests PTCE real study dumps we guarantee that you won’t be regret of your decision. Google Professional-Data-Engineer - Selecting the right method will save your time and money. Though at first a lot of our new customers didn't believe our Fortinet NSE4_FGT_AD-7.6 exam questions, but they have became the supporters now. If you want to own a better and bright development in the IT your IT career, it is the only way for you to pass ISACA CISA-KR exam. As a result, many customers get manifest improvement and lighten their load by using our Amazon SAP-C02 actual exam.
Updated: May 28, 2022