Our 200-301 Materials study materials can have such a high pass rate, and it is the result of step by step that all members uphold the concept of customer first. If you use a trial version of 200-301 Materials training prep, you can find that our study materials have such a high passing rate and so many users support it. After using the trial version, we believe that you will be willing to choose 200-301 Materials exam questions. So our 200-301 Materials exam questions have active demands than others with high passing rate of 98 to 100 percent. Don't doubt the pass rate, as long as you try our 200-301 Materials study questions, then you will find that pass the exam is as easy as pie. And the content of the 200-301 Materials exam questions is always the latest information contained for our technicals update the questions and answers in the first time.
CCNA 200-301 Perhaps this is the beginning of your change.
Many exam candidates feel hampered by the shortage of effective 200-301 - Cisco Certified Network Associate Exam Materials preparation quiz, and the thick books and similar materials causing burden for you. In the process of job hunting, we are always asked what are the achievements and what certificates have we obtained? Therefore, we get the test Cisco certification and obtain the qualification certificate to become a quantitative standard, and our 200-301 Latest Dumps Ppt learning guide can help you to prove yourself the fastest in a very short period of time. Life is short for each of us, and time is precious to us.
If you use the APP online version, just download the application. Program, you can enjoy our 200-301 Materials test material service. Our 200-301 Materials test questions are available in three versions, including PDF versions, PC versions, and APP online versions.
Our Cisco 200-301 Materials learning guide will be your best choice.
Our company always put the quality of the 200-301 Materials practice materials on top priority. In the past ten years, we have made many efforts to perfect our 200-301 Materials study materials. Our 200-301 Materials study questions cannot tolerate any small mistake. All staff has made great dedication to developing the 200-301 Materials exam simulation. Our professional experts are devoting themselves on the compiling and updating the exam materials and our services are ready to guide you 24/7 when you have any question.
With the latest 200-301 Materials test questions, you can have a good experience in practicing the test. Moreover, you have no need to worry about the price, we provide free updating for one year and half price for further partnerships, which is really a big sale in this field.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
You may previously have thought preparing for the ACAMS CAMS-KR practice exam will be full of agony, actually, you can abandon the time-consuming thought from now on. If you have some questions about our CompTIA CV0-004 exam braindumps, ask for our after-sales agent, they will solve the problems for you as soon as possible. Unlike many other learning materials, our ISTQB ISTQB-CTFL-KR study materials are specially designed to help people pass the exam in a more productive and time-saving way, and such an efficient feature makes it a wonderful assistant in personal achievement as people have less spare time nowadays. In today’s society, many enterprises require their employees to have a professional SAP C-OCM-2503 certification. Goldmile-Infobiz provide training tools included Cisco certification IBM S2000-025 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam.
Updated: May 28, 2022