Our 200-301 Name practice quiz will be the optimum resource. Many customers claimed that our study materials made them at once enlightened after using them for review. If you are still tentative about our 200-301 Name exam dumps, and some exam candidate remain ambivalent to the decision of whether to choose our 200-301 Name training materials, there are free demos for your reference for we understand your hesitation. Our 200-301 Name preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 200-301 Name study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 200-301 Name certification. If we waste a little bit of time, we will miss a lot of opportunities. We give priority to the relationship between us and users of the 200-301 Name preparation materials, as a result of this we are dedicated to create a reliable and secure software system not only in payment on 200-301 Name training quiz the but also in their privacy.
CCNA 200-301 Our staff will help you with genial attitude.
So our study materials are helpful to your preparation of the 200-301 - Cisco Certified Network Associate Exam Name exam. Some candidates may considerate whether the New 200-301 Exam Guide exam guide is profession, but it can be sure that the contents of our study materials are compiled by industry experts after them refining the contents of textbooks, they have good knowledge of exam. New 200-301 Exam Guide test questions also has an automatic scoring function, giving you an objective rating after you take a mock exam to let you know your true level.
In the end, you will become an excellent talent. As you know, the 200-301 Name certificate is hard to get for most people. But our 200-301 Name study guide will offer you the most professional guidance.
Cisco 200-301 Name - So there is no matter of course.
Do you want to get a better job or a higher income? If the answer is yes, then you should buy our 200-301 Name exam questions for our 200-301 Name study materials can help you get what you want. Go against the water and retreat if you fail to enter. The pressure of competition is so great now. If you are not working hard, you will lose a lot of opportunities! There is no time, quickly purchase 200-301 Name study materials, pass the exam! Come on!
In traditional views, 200-301 Name practice materials need you to spare a large amount of time on them to accumulate the useful knowledge may appearing in the real exam. However, our 200-301 Name learning questions are not doing that way.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
We introduce a free trial version of the Salesforce MC-101 learning guide because we want users to see our sincerity. CompTIA PT0-003 - And we have become a famous brand for we have engaged in this career. The existence of our HP HPE6-A90 learning guide is regarded as in favor of your efficiency of passing the exam. The profession of our experts is expressed in our Fortinet NSE6_SDW_AD-7.6 training prep thoroughly. ACAMS CAMS - And we will send you the new updates if our experts make them freely.
Updated: May 28, 2022