You can completely rest assured that our 200-301 Outline dumps collection will ensure you get high mark in the formal test. You will get lots of knowledge from our website. With the best quality of 200-301 Outline braindumps pdf from our website, getting certified will be easier and fast. Since the date you pay successfully, you will enjoy the 200-301 Outline test guide freely for one year, which can save your time and money. We will send you the latest 200-301 Outline study dumps through your email, so please check your email then. Our exam materials are collected from the real test center and edited by our experienced experts.
actual 200-301 Outline brain dumps.
CCNA 200-301 Outline - Cisco Certified Network Associate Exam So their perfection is unquestionable. We are in dire to help you conquer any questions about Exam 200-301 Material training materials emerging during your review. If you want to be accepted as an indispensable member in your working condition, and obliterate opponents from a great distance, start by using our Exam 200-301 Material exam prep to pass the Exam 200-301 Material exam now.
High speed running completely has no problem at all. Some people are not good at operating computers. So you might worry about that the 200-301 Outline certification materials are not suitable for you.
Cisco 200-301 Outline - So it will never appear flash back.
Are you racking your brains for a method how to pass Cisco 200-301 Outline exam? Cisco 200-301 Outline certification test is one of the valuable certification in modern IT certification. Within the last few decades, IT got a lot of publicity and it has been a necessary and desirable part of modern life. Cisco certification has been well recognized by international community. So, most IT people want to improve their knowledge and their skills by Cisco certification exam. 200-301 Outline test is one of the most important exams and the certificate will bring you benefits.
All contents are passing rigid inspection. You will never find small mistakes such as spelling mistakes and typographical errors in our 200-301 Outline learning guide.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
SAP C-BCWME-2504 - We assure Goldmile-Infobiz provide you with the latest and the best questions and answers which will let you pass the exam at the first attempt. Also, it will display how many questions of the MSSC CLT exam questions you do correctly and mistakenly. ACFE CFE-Investigation - The one is PDF version and another is SOFT version. The software version of the SAP C_BCWME_2504 exam reference guide is very practical. Microsoft AZ-801 - Once you have checked our demo, you will find the study materials we provide are what you want most.
Updated: May 28, 2022