This shows what? As long as you use our products, you can pass the exam! Do you want to be one of 99? Quickly purchase our 200-301 Pattern exam questions! And you will find that the coming exam is just a piece of cake in front of you. We promise that you can get through the challenge winning the 200-301 Pattern exam within a week. There is no life of bliss but bravely challenging yourself to do better. Come on!
CCNA 200-301 It is a long process to compilation.
CCNA 200-301 Pattern - Cisco Certified Network Associate Exam We have been studying for many years since kindergarten. All consumers who are interested in 200-301 Valid Test Collection File guide materials can download our free trial database at any time by visiting our platform. During the trial process, you can learn about the three modes of 200-301 Valid Test Collection File study quiz and whether the presentation and explanation of the topic in 200-301 Valid Test Collection File preparation questions is consistent with what you want.
If you eventually fail the exam, we will refund the fee by the contract. We are confident that in the future, our 200-301 Pattern study tool will be more attractive and the pass rate will be further enhanced. As the authoritative provider of 200-301 Pattern guide training, we can guarantee a high pass rate compared with peers, which is also proved by practice.
Come and buy our Cisco 200-301 Pattern exam guide!
Most people define 200-301 Pattern study tool as regular books and imagine that the more you buy, the higher your grade may be. It is true this kind of view make sense to some extent. However, our 200-301 Pattern real questions are high efficient priced with reasonable amount, acceptable to exam candidates around the world. Our 200-301 Pattern practice materials comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. Unlike those untenable practice materials in the market, our 200-301 Pattern practice materials are highly utilitarian for their accuracy of the real exam because all content are compiled by proficient experts who engaged in this area more than ten years. It is our unswerving will to help you pass the exam by 200-301 Pattern study tool smoothly.
Up to now, many people have successfully passed the 200-301 Pattern exam with our assistance. So you need to be brave enough to have a try.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
HashiCorp Terraform-Associate-003 - They are unsuspecting experts who you can count on. And all of the PDF version, online engine and windows software of the ACFE CFE-Investigation study guide will be tested for many times. All these versions of our Alibaba SAE-C01 exam braindumps are popular and priced cheap with high quality and accuracy rate. You should concentrate on finishing all exercises once you are determined to pass the PMI PMP-CN exam. Allowing for there is a steady and growing demand for our CFA Institute Sustainable-Investing real exam with high quality at moderate prices, we never stop the pace of doing better.
Updated: May 28, 2022