The 200-301 Sheet test engine contains self-assessment features like marks, progress charts, etc. Besides, the Easy-to-use 200-301 Sheet layout will facilitate your preparation for 200-301 Sheet real test. You can pass your 200-301 Sheet certification without too much pressure. In addition, except 200-301 Sheet, many other certification exams are also useful. The latest information of these tests can be found in our Goldmile-Infobiz. You will never regret choosing our 200-301 Sheet test answers as your practice materials because we will show you the most authoritative study guide.
CCNA 200-301 We get first-hand information; 2.
We have a lasting and sustainable cooperation with customers who are willing to purchase our 200-301 - Cisco Certified Network Associate Exam Sheet actual exam. As we sell electronic files, there is no need to ship. After payment you can receive Valid Exam 200-301 Questions And Answers exam review questions you purchase soon so that you can study before.
We have testified more and more candidates’ triumph with our 200-301 Sheet practice materials. We believe you will be one of the winners like them. With the high pass rate as 98% to 100%, we can proudly claim that we are unmatched in the market for our accurate and latest 200-301 Sheet exam dumps.
Cisco 200-301 Sheet - You can browser our official websites.
During nearly ten years, our 200-301 Sheet exam questions have met with warm reception and quick sale in the international market. Our 200-301 Sheet study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. With tens of thousands of our loyal customers supporting us all the way, we believe we will do a better job in this career. More and more candidates will be benefited from our excellent 200-301 Sheet training guide!
Our 200-301 Sheet training prep was produced by many experts, and the content was very rich. At the same time, the experts constantly updated the contents of the 200-301 Sheet study materials according to the changes in the society.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
That is the reason why I want to recommend our SAP C-BCBTM-2502 prep guide to you, because we believe this is what you have been looking for. As long as you download our CheckPoint 156-315.81 practice engine, you will be surprised to find that CheckPoint 156-315.81 learning guide is well designed in every detail no matter the content or the displays. Microsoft PL-400-KR - You may try it! The service tenet of our company and all the staff work mission is: through constant innovation and providing the best quality service, make the Python Institute PCAP-31-03 question guide become the best customers electronic test study materials. If you buy our CompTIA PK0-005 test prep you will pass the exam easily and successfully，and you will realize you dream to find an ideal job and earn a high income.
Updated: May 28, 2022