By passing the exams multiple times on practice test software, you will be able to pass the real 200-301 Test test in the first attempt. With our 200-301 Test practice test software, you can simply assess yourself by going through the 200-301 Test practice tests. We highly recommend going through the 200-301 Test answers multiple times so you can assess your preparation for the 200-301 Test exam. If you opting for this 200-301 Test study engine, it will be a shear investment. We never boost our achievements, and all we have been doing is trying to become more effective and perfect as your first choice, and determine to help you pass the 200-301 Test preparation questions as efficient as possible. They handpicked what the 200-301 Test training guide usually tested in exam recent years and devoted their knowledge accumulated into these 200-301 Test actual tests.
CCNA 200-301 We have accommodating group offering help 24/7.
CCNA 200-301 Test - Cisco Certified Network Associate Exam Do not lose the wonderful chance to advance with times. Being devoted to this area for over ten years, our experts keep the excellency of our Cisco Certified Network Associate Exam exam question like always. They are distinguished experts in this area who can beef up your personal capacity.
Therefore, you are able to get hang of the essential points in a shorter time compared to those who are not willing to use our 200-301 Test exam torrent. We guarantee that after purchasing our 200-301 Test exam torrent, we will deliver the product to you as soon as possible within ten minutes. So you don’t need to wait for a long time and worry about the delivery time or any delay.
Cisco 200-301 Test - The first one is downloading efficiency.
Did you often feel helpless and confused during the preparation of the 200-301 Test exam? Do you want to find an expert to help but feel bad about the expensive tutoring costs? Don't worry. Our 200-301 Test exam questions can help you to solve all the problems. Our 200-301 Test study material always regards helping students to pass the exam as it is own mission. And we have successfully helped numerous of the candidates pass their exams.
And they are the masterpieces of processional expertise these area with reasonable prices. Besides, they are high efficient for passing rate is between 98 to 100 percent, so they can help you save time and cut down additional time to focus on the 200-301 Test actual exam review only.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 5
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
In addition to high quality and high efficiency of our Microsoft MS-102 exam questions, considerate service is also a big advantage of our company. As a representative of clientele orientation, we promise if you fail the practice exam after buying our Workday Workday-Pro-Talent-and-Performance training quiz, we will give your compensatory money full back. Therefore, you can try to download the demo of Amazon SAP-C02 latest dumps that you can know if it is what you want. PRINCE2 P3O-Foundation - There is no doubt that you can get a great grade. Amazon AWS-Certified-Developer-Associate-KR - We also provide a 100% refund policy for all users who purchase our questions.
Updated: May 28, 2022