As a result, many customers get manifest improvement and lighten their load by using our 200-301 Update practice materials. Up to now, more than 98 percent of buyers of our practice materials have passed it successfully. 200-301 Update practice materials can be classified into three versions: the pdf, the software and the app version. We offer the most considerate after-sales services for you 24/7 with the help of patient staff and employees. They are all patient and enthusiastic to offer help on 200-301 Update study guide. Unlike many other learning materials, our 200-301 Update study materials are specially designed to help people pass the exam in a more productive and time-saving way, and such an efficient feature makes it a wonderful assistant in personal achievement as people have less spare time nowadays.
CCNA 200-301 It is a professional IT exam training site.
Therefore, we sincerely wish you can attempt to our 200-301 - Cisco Certified Network Associate Exam Update test question. Goldmile-Infobiz Cisco 200-301 New Test Collection Free exam training materials can help you to pass the exam. Any restrictions start from your own heart, if you want to pass the Cisco 200-301 New Test Collection Free examination, you will choose the Goldmile-Infobiz.
They can even broaden amplitude of your horizon in this line. Of course, knowledge will accrue to you from our 200-301 Update training guide. There is no inextricably problem within our 200-301 Update learning materials.
Cisco 200-301 Update - So you can take a best preparation for the exam.
With the help of the 200-301 Update practice exam questions and preparation material offered by Goldmile-Infobiz, you can pass any 200-301 Update certifications exam in the first attempt. You don’t have to face any trouble, and you can simply choose to do a selective 200-301 Update brain dumps to pass the exam. We offer guaranteed success with 200-301 Update dumps questions on the first attempt, and you will be able to pass the 200-301 Update exam in short time. You can always consult our 200-301 Update certified professional support if you are facing any problems.
Goldmile-Infobiz's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
WGU Managing-Cloud-Security - Want to know what they said about us, visit our testimonial section and read first-hand experiences from verified users. Microsoft SC-200 - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. Microsoft AI-900 - We take the rights of the consumer into consideration. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the Cisco ACFE CFE-Financial-Transactions-and-Fraud-Schemes exam. SAP C-ARCIG-2508 - We can sure that it is very significant for you to be aware of the different text types and how best to approach them by demo.
Updated: May 28, 2022