This may be the best chance to climb the top of your life. Our 350-401 Braindumps prepare questions are suitable for people of any culture level, whether you are the most basic position, or candidates who have taken many exams, is a great opportunity for everyone to fight back. According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. With a 350-401 Braindumps certification, you can not only get a good position in many companies, but also make your financial free come true. Besides, you can have more opportunities and challenge that will make your life endless possibility. If you are not confident in your choice, you can seek the help of online services.
CCNP Enterprise 350-401 They all have high authority in the IT area.
CCNP Enterprise 350-401 Braindumps - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) There are so many of them that they make you believe that their product is what you are looking for. Now many IT professionals agree that Cisco certification Lab 350-401 Questions exam certificate is a stepping stone to the peak of the IT industry. Cisco certification Lab 350-401 Questions exam is an exam concerned by lots of IT professionals.
You no longer have to worry about after the exam. At the moment you put the paper down you can walk out of the examination room with confidence. 350-401 Braindumps study engine is so amazing.
Our Cisco 350-401 Braindumps study prep will not disappoint you.
Success is has method. You can be successful as long as you make the right choices. Goldmile-Infobiz's Cisco 350-401 Braindumps exam training materials are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail. But the remedy is not too late, go to buy Goldmile-Infobiz's Cisco 350-401 Braindumps exam training materials quickly. With it, you will get a different life. Remember, the fate is in your own hands.
Our 350-401 Braindumps study dumps will assist you to overcome your shortcomings and become a persistent person. Once you have made up your minds to change, come to purchase our 350-401 Braindumps training practice.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
ISACA CRISC - With this training materials, you will speed up the pace of success, and you will be more confident. SAP C-CPE-2409 - We can't say it’s the best reference, but we're sure it won't disappoint you. SAP C_S4CPB_2508 - However, through investigation or personal experience, you will find Goldmile-Infobiz questions and answers are the best ones for your need. Our Microsoft AB-900 study guide is carefully edited and reviewed by our experts. Huawei H25-532_V1.0 - This is because IT experts can master the question point well, so that all questions the candidates may come across in the actual test are included in Goldmile-Infobiz exam dumps.
Updated: May 28, 2022