350-401 Check - Cisco Reliable Implementing Cisco Enterprise Network Core Technologies 350-401 Encor Test Dumps.Zip - Goldmile-Infobiz

Because our Goldmile-Infobiz experienced technicians have provided efficient way for you to easily get 350-401 Check exam certification. We constantly update test simulation software in order to help you who are preparing for 350-401 Check exam by efforts to get the satisfactory results. If you want to own a better and bright development in the IT your IT career, it is the only way for you to pass 350-401 Check exam. And with the simpilied content of our 350-401 Check practice questions, you can have a wonderful study experience as well. Our 350-401 Check practice materials can be understood with precise content for your information, which will remedy your previous faults and wrong thinking of knowledge needed in this exam. Don't ask me why you should purchase 350-401 Check valid exam prep, yes, of course it is because of its passing rate.

CCNP Enterprise 350-401 We have 24/7 Service Online Support services.

CCNP Enterprise 350-401 Check - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Through many reflects from people who have purchase Goldmile-Infobiz's products, Goldmile-Infobiz is proved to be the best website to provide the source of information about certification exam. And if we have a new version of your Llatest Test 350-401 Camp Sheet study guide, we will send an E-mail to you. Whenever you have questions about our Llatest Test 350-401 Camp Sheet learning quiz, you are welcome to contact us via E-mail.

A lot of IT professional know that Cisco certification 350-401 Check exam can help you meet these aspirations. Goldmile-Infobiz is a website which help you successfully pass Cisco 350-401 Check. I believe that people want to have good prospects of career whatever industry they work in.

Cisco 350-401 Check - So that you can achieve a multiplier effect.

You can download and try out our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam torrent freely before you purchase our product. Our product provides the demo thus you can have a full understanding of our 350-401 Check prep torrent. You can visit the pages of the product and then know the version of the product, the updated time, the quantity of the questions and answers, the characteristics and merits of the 350-401 Check test braindumps, the price of the product and the discount. There are also the introduction of the details and the guarantee of our 350-401 Check prep torrent for you to read. You can also know how to contact us and what other client’s evaluations about our 350-401 Check test braindumps. The pages of our product also provide other information about our product and the exam.

Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications.

350-401 PDF DEMO:

QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.

QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html

SAP C_TS422_2504 - The procedure of refund is very simple. And then, to take Cisco HashiCorp Terraform-Associate-003 exam can help you to express your desire. With free demos to take reference, as well as bountiful knowledge to practice, even every page is carefully arranged by our experts, our AACE International AACE-PSP exam materials are successful with high efficiency and high quality to navigate you throughout the process. If you successfully get Cisco Salesforce Plat-101 certificate, you can finish your work better. Our Microsoft AI-102 exam prep is of reasonably great position from highly proficient helpers who have been devoted to their quality over ten years to figure your problems out.

Updated: May 28, 2022