The most efficient our 350-401 Demo study materials just want to help you pass the exam more smoothly. For our technicals are checking the changes of the questions and answers everyday to keep them the latest and valid ones. Of course, 350-401 Demo simulating exam are guaranteed to be comprehensive while also ensuring the focus. Besides, the detailed answers analysis provided by our professionals will make you be more confidence to pass 350-401 Demo exam. Many candidates worry that after a long-time review of 350-401 Demo, they may still fail the exam due to inadaptation of the test model. The science and technology are very developed now.
CCNP Enterprise 350-401 The knowledge you have learned is priceless.
You will witness your positive changes after completing learning our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Demo study guide. To choose us is to choose success! It is an incredible opportunity among all candidates fighting for the desirable exam outcome to have our 350-401 Hot Questions practice materials.
A lot of our candidates used up all examination time and leave a lot of unanswered questions of the 350-401 Demo exam questions. It is a bad habit. In your real exam, you must answer all questions in limited time.
Cisco 350-401 Demo - Stop hesitating.
Elaborately designed and developed 350-401 Demo test guide as well as good learning support services are the key to assisting our customers to realize their dreams. Our 350-401 Demo study braindumps have a variety of self-learning and self-assessment functions to detect learners’ study outcomes, and the statistical reporting function of our 350-401 Demo test guide is designed for students to figure out their weaknesses and tackle the causes, thus seeking out specific methods dealing with them. Most of them give us feedback that they have learned a lot from our 350-401 Demo exam guide and think it has a lifelong benefit. They have more competitiveness among fellow workers and are easier to be appreciated by their boss. In fact, the users of our 350-401 Demo exam have won more than that, but a perpetual wealth of life.
Here has professional knowledge, powerful exam dumps and quality service, which can let you master knowledge and skill with high speed and high efficiency. What's more, it can help you are easy to cross the border and help you access to success.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Under the guidance of our Lpi 101-500 test braindumps, 20-30 hours’ preparation is enough to help you obtain the Cisco certification, which means you can have more time to do your own business as well as keep a balance between a rest and taking exams. The SAP C-ARCIG-2508 exam software designed by our Goldmile-Infobiz will help you master SAP C-ARCIG-2508 exam skills. Our VMware 2V0-16.25 exam question can help make your dream come true. Microsoft AZ-700-KR - If you have any question about our products and services, you can contact our online support in our Goldmile-Infobiz website, and you can also contact us by email after your purchase. Our learning materials are practically tested, choosing our Microsoft SC-900 exam guide, you will get unexpected surprise.
Updated: May 28, 2022