Goldmile-Infobiz exam questions have good quality and good service. As long as you choose Goldmile-Infobiz, Goldmile-Infobiz will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time. Goldmile-Infobiz is a professional website. As one of the most authoritative question bank in the world, our study materials make assurance for your passing the 350-401 Dumps exam. According to the statistics shown in the feedback chart, the general pass rate for latest 350-401 Dumps test prep is 98%, which is far beyond that of others in this field. Goldmile-Infobiz help you to find real Cisco 350-401 Dumps exam preparation process in a real environment.
CCNP Enterprise 350-401 The procedure of refund is very simple.
Goldmile-Infobiz will help you to find what you need in the exam and our dumps must help you to obtain 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps certificate. No one lose interest during using our 350-401 Reliable Test Cram Sheet actual exam and become regular customers eventually. With free demos to take reference, as well as bountiful knowledge to practice, even every page is carefully arranged by our experts, our 350-401 Reliable Test Cram Sheet exam materials are successful with high efficiency and high quality to navigate you throughout the process.
If you successfully get Cisco 350-401 Dumps certificate, you can finish your work better. Although the test is so difficult, with the help of Goldmile-Infobiz exam dumps you don't need so hard to prepare for the exam. After you use Goldmile-Infobiz Cisco 350-401 Dumps study guide, you not only can pass the exam at the first attempt, also can master the skills the exam demands.
Cisco 350-401 Dumps - Our products are just suitable for you.
Time is the sole criterion for testing truth, similarly, passing rates are the only standard to test whether our 350-401 Dumps study materials are useful. Our pass rate of our 350-401 Dumps training prep is up to 98% to 100%, anyone who has used our 350-401 Dumps exam practice has passed the exam successfully. And we have been treated as the most popular vendor in this career and recognised as the first-class brand to the candidates all over the world.
You will get your 350-401 Dumps certification with little time and energy by the help of out dumps. Goldmile-Infobiz is constantly updated in accordance with the changing requirements of the Cisco certification.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
SAP C-BCBAI-2509 - We are willing to deal with your problems. As we all know, it is not an easy thing to gain the HITRUST CCSFP certification. Through our test, the performance of our IBM C1000-204 learning quide becomes better than before. Our dumps collection will save you much time and ensure you get high mark in USGBC LEED-Green-Associate-KR actual test with less effort. We have been considered to be the best friend for helping numerous of our customers successfully get their according Huawei H11-861_V4.0 certification.
Updated: May 28, 2022