Just only dozens of money on 350-401 Dumps latest study guide will assist you 100% pass exam and 24-hours worm aid service. Do you want to double your salary in a short time? Yes, it is not a dream. Our 350-401 Dumps latest study guide can help you. We believe that if you can learn about several advantages of 350-401 Dumps preparation questions, I believe you have more understanding of the real questions and answers. You can download the trial versions of the 350-401 Dumps exam questions for free. Questions and answers from our 350-401 Dumps free download files are tested by our certified professionals and the accuracy of our questions are 100% guaranteed.
CCNP Enterprise 350-401 So our product is a good choice for you.
By passing the exams multiple times on practice test software, you will be able to pass the real 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Dumps test in the first attempt. If you opting for this 350-401 Valid Test Pass4Sure study engine, it will be a shear investment. We never boost our achievements, and all we have been doing is trying to become more effective and perfect as your first choice, and determine to help you pass the 350-401 Valid Test Pass4Sure preparation questions as efficient as possible.
To make sure your situation of passing the certificate efficiently, our 350-401 Dumps study materials are compiled by first-rank experts. So the proficiency of our team is unquestionable. They handpicked what the 350-401 Dumps training guide usually tested in exam recent years and devoted their knowledge accumulated into these 350-401 Dumps actual tests.
Cisco 350-401 Dumps - There is no doubt that you can get a great grade.
It is undeniable that a secure investment can bring many benefits to candidates who want to pass the 350-401 Dumps exam, without worrying that their money is wasted on useless exam materials, and the most important thing is to pass 350-401 Dumps exams. In addition, after the purchase, the candidate will be entitled to a one-year free update, which will help the candidate keep the latest news feeds, and will not leave any opportunity that may lead them to fail the 350-401 Dumps exam. We also provide a 100% refund policy for all users who purchase our questions. If for any reason, any candidates fail in the Cisco 350-401 Dumps certification exam, we can help you to refund your money and ensure your investment is absolutely safe.
All 350-401 Dumps test prep is made without levity and the passing rate has up to 98 to 100 percent now. We esteem your variant choices so all these versions of 350-401 Dumps exam guides are made for your individual preference and inclination.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
What are you waiting for? Just rush to buy our Microsoft AZ-204-KR learning braindumps! If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through CompTIA PT0-003 exam, then you must have CompTIA PT0-003 question torrent. APMG-International ISO-IEC-27001-Foundation - Sometimes, their useful suggestions will also be adopted. After you know the characteristics and functions of our SOCRA CCRP training materials in detail, you will definitely love our exam dumps and enjoy the wonderful study experience. Many candidates may think that it will take a long time to prapare for the Huawei H12-811_V1.0-ENU exam.
Updated: May 28, 2022