By adding all important points into practice materials with attached services supporting your access of the newest and trendiest knowledge, our 350-401 Duration preparation materials are quite suitable for you right now as long as you want to pass the 350-401 Duration exam as soon as possible and with a 100% pass guarantee. Our 350-401 Duration study questions are so popular that everyday there are numerous of our loyal customers wrote to inform and thank us that they passed their exams for our exam braindumps. Not only because that our 350-401 Duration study materials can work as the guarantee to help them pass, but also because that our 350-401 Duration learning questions are high effective according to their accuracy. Our professionals are specialized in providing our customers with the most reliable and accurate 350-401 Duration exam guide and help them pass their exams by achieve their satisfied scores. As you can see that on our website, we have free demos of the 350-401 Duration study materials are freebies for your information.
CCNP Enterprise 350-401 No one will laugh at a hardworking person.
CCNP Enterprise 350-401 Duration - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one. Once you have used our 350-401 Exam Overviews exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use 350-401 Exam Overviews exam training at your own right. Our 350-401 Exam Overviews exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use 350-401 Exam Overviews test guide, you can enter the learning state.
We can find that the Internet is getting closer and closer to our daily life and daily work. We can hardly leave the Internet now, we usually use computer or iPad to work and learn. Inevitably, we will feel too tired if we worked online too long.
Cisco 350-401 Duration - You won't regret for your wise choice.
As the labor market becomes more competitive, a lot of people, of course including students, company employees, etc., and all want to get 350-401 Duration authentication in a very short time, this has developed into an inevitable trend. Each of them is eager to have a strong proof to highlight their abilities, so they have the opportunity to change their current status, including getting a better job, have higher pay, and get a higher quality of material, etc. It is not easy to qualify for a qualifying exam in such a short period of time. Our company's 350-401 Duration learning material is very good at helping customers pass the exam and obtain a certificate in a short time, and now I'm going to show you our 350-401 Duration Learning materials.
In order to make sure you have answered all questions, we have answer list to help you check. Then you can choose the end button to finish your exercises of the 350-401 Duration study guide.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Fortinet FCSS_SASE_AD-25 - Good opportunities are always for those who prepare themselves well. Fortinet NSE6_SDW_AD-7.6 - The price is set reasonably. Scrum SAFe-Practitioner - Besides, the exam materials we sold are to provide the answers. However, how to pass Cisco certification Fortinet FCSS_SASE_AD-24 exam quickly and simply? Our Goldmile-Infobiz can always help you solve this problem quickly. Citrix 1Y0-231 - In Goldmile-Infobiz you can always find out the most suitable training way for you to pass the exam easily.
Updated: May 28, 2022