When you buy or download our 350-401 Fee training materials ,we will adopt the most professional technology to encrypt every user’s data，giving you a secure buying environment. If you encounter similar questions during the installation of the 350-401 Fee practice questions, our staffs will provide you with remote technical guidance. We believe that our professional services will satisfy you on our best 350-401 Fee exam braindumps. Our 350-401 Fee exam quiz is so popular not only for the high quality, but also for the high efficiency services provided which owns to the efforts of all our staffs. First of all, if you are not sure about the 350-401 Fee exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy 350-401 Fee study guide or not. Our product’s passing rate is 99% which means that you almost can pass the test with no doubts.
CCNP Enterprise 350-401 They compile each answer and question carefully.
All the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Fee training files of our company are designed by the experts and professors in the field. We can guarantee that our study materials will be suitable for all people and meet the demands of all people, including students, workers and housewives and so on. If you decide to buy and use the 350-401 Valid Test Syllabus training materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt.
The first goal of our company is to help all people to pass the 350-401 Fee exam and get the related certification in the shortest time. Through years of concentrated efforts of our excellent experts and professors, our company has compiled the best helpful and useful 350-401 Fee test training materials to meet all people’s demands, and in addition, we can assure to everyone that our study materials have a higher quality than other study materials in the global market, at the same time, these people will be easier to be admitted to the human resources supervisor. The 350-401 Fee learn prep from our company has helped thousands of people to pass the exam and get the related certification, and then these people have enjoyed a better job and a better life.
Cisco 350-401 Fee - The rate of return will be very obvious for you.
Through our investigation and analysis of the real problem over the years, our 350-401 Fee prepare questions can accurately predict the annual 350-401 Fee exams. In the actual exam process, users will encounter almost half of the problem is similar in our products. Even if the syllabus is changing every year, the 350-401 Fee quiz guide’s experts still have the ability to master propositional trends. Believe that such a high hit rate can better help users in the review process to build confidence, and finally help users through the qualification examination to obtain a certificate. All in all, we want you to have the courage to challenge yourself, and our 350-401 Fee exam prep will do the best for the user's expectations.
In fact, our 350-401 Fee exam questions have helped tens of thousands of our customers successfully achieve their certification. The moment you choose to go with our 350-401 Fee study materials, your dream will be more clearly presented to you.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
If you want to progress and achieve their ideal life, if you are not satisfied with life now, if you still use the traditional methods by exam, so would you please choose the Linux Foundation CNPA test materials, it will surely make you shine at the moment. Fortinet NSE7_SSE_AD-25 - At home, you can use the computer and outside you can also use the phone. Our SAP C_ARSUM_2508 training materials are designed to help users consolidate what they have learned, will add to the instant of many training, the user can test their learning effect in time after finished the part of the learning content, have a special set of wrong topics in our SAP C_ARSUM_2508 guide dump, enable users to find their weak spot of knowledge in this function, iterate through constant practice, finally reach a high success rate. Fortinet FCSS_NST_SE-7.4 - There are no additional ads to disturb the user to use the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification question. Oracle 1z0-1046-25 - No matter how good the product is users will encounter some difficult problems in the process of use, and how to deal with these problems quickly becomes a standard to test the level of product service.
Updated: May 28, 2022