While others are playing games online, you can do online 350-401 Fee exam questions. We are sure that as you hard as you are, you can pass 350-401 Fee exam easily in a very short time. While others are surprised at your achievement, you might have found a better job. App online version of 350-401 Fee learning engine is suitable to all kinds of digital devices and offline exercise. You will find your favorite one if you have a try! In addition, it is very easy and convenient to make notes during the study for 350-401 Fee real test, which can facilitate your reviewing.
CCNP Enterprise 350-401 Stop hesitating.
You may urgently need to attend 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Fee certificate exam and get the certificate to prove you are qualified for the job in some area. It will help you to accelerate your knowledge and improve your professional ability by using our New 350-401 Test Sample Online vce dumps. We are so proud of helping our candidates go through New 350-401 Test Sample Online real exam in their first attempt quickly.
We provide the 350-401 Fee study materials which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the 350-401 Fee test. Our product’s price is affordable and we provide the wonderful service before and after the sale to let you have a good understanding of our 350-401 Fee study materials before your purchase, you had better to have a try on our free demos.
Cisco 350-401 Fee - We strongly advise you to have a brave attempt.
We has a long history of 10 years in designing the 350-401 Fee exam guide and enjoys a good reputation across the globe. There are so many features to show that our 350-401 Fee study engine surpasses others. We can confirm that the high quality is the guarantee to your success. At the same time, the prices of our 350-401 Fee practice materials are quite reasonable for no matter the staffs or the students to afford. What is more, usually we will give some discounts to our worthy customers.
We have designed a chat window below the web page. Once you want to ask some questions about the 350-401 Fee training engine, you can click the little window.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Many users have witnessed the effectiveness of our HP HPE0-J68-KR guide braindumps you surely will become one of them. Cisco 200-201 - Using our products, you can get everything you want, including your most important pass rate. To understand our PMI PMP learning questions in detail, just come and try! ITIL ITIL4-DPI - Being a social elite and making achievements in your own field may be the dream of all people. Microsoft PL-400 - But the thing is not so easy for them they need many efforts to achieve their goals.
Updated: May 28, 2022