So that you can get the career you want, and can achieve your dreams. With Goldmile-Infobiz's Cisco 350-401 Free exam training materials, you can get what you want. All the IT professionals are familiar with the Cisco 350-401 Free exam. We believe that the trial version will help you a lot. If you are not certain whether the 350-401 Free prep guide from our company is suitable for you or not, so you are hesitate to buy and use our study materials. Goldmile-Infobiz not only provide the products which have high quality to each candidate, but also provides a comprehensive after-sales service.
CCNP Enterprise 350-401 Missing the chance, I am sure you must regret it.
We have three different versions of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Free exam questions which can cater to different needs of our customers. Besides, we have the largest IT exam repository, if you are interested in 350-401 Hot Questions exam or any other exam dumps, you can search on our Goldmile-Infobiz or chat with our online support any time you are convenient. Wish you success in 350-401 Hot Questions exam.
And we have three different versions Of our 350-401 Free study guide: the PDF, the Software and the APP online. If you are not sure whether our 350-401 Free exam braindumps are suitable for you, you can request to use our trial version. Of course, 350-401 Free learning materials produced several versions of the product to meet the requirements of different users.
actual Cisco 350-401 Free brain dumps.
Our 350-401 Free practice materials comprise of a number of academic questions for your practice, which are interlinked and helpful for your exam. So their perfection is unquestionable. As a result, 350-401 Free real exam win worldwide praise and acceptance. Our 350-401 Free practice materials are determinant factors giving you assurance of smooth exam. The sooner you make up your mind, the more efficient you will win.
We are in dire to help you conquer any questions about 350-401 Free training materials emerging during your review. If you want to be accepted as an indispensable member in your working condition, and obliterate opponents from a great distance, start by using our 350-401 Free exam prep to pass the 350-401 Free exam now.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
ISQI CPRE-FL_Syll_3.0 - High speed running completely has no problem at all. Long time learning might makes your attention wondering but our effective Salesforce Platform-App-Builder study materials help you learn more in limited time with concentrated mind. CrowdStrike CCFA-200b - They will send you an electronic invoice, which is convenient. On the other side, Products are purchasable, knowledge is not, and our SAP C_SIGVT_2506 practice materials can teach you knowledge rather than charge your money. Not only that our CompTIA DA0-001 exam questions can help you pass the exam easily and smoothly for sure and at the same time you will find that the CompTIA DA0-001 guide materials are valuable, but knowledge is priceless.
Updated: May 28, 2022