We not only offer 350-401 Mock free demos for your experimental overview of our practice materials, but being offered free updates for whole year long. Here we want to give you a general idea of our 350-401 Mock exam questions. Our website is operated with our 350-401 Mock practice materials related with the exam. Our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) exam question has been widely praised by all of our customers in many countries and our company has become the leader in this field. Our product boost varied functions and they include the self-learning and the self-assessment functions, the timing function and the function to stimulate the exam to make you learn efficiently and easily. So we hold responsible tents when compiling the 350-401 Mock learning guide.
CCNP Enterprise 350-401 They compile each answer and question carefully.
If you buy the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Mock learning dumps from our company, we can promise that you will get the professional training to help you pass your exam easily. We can guarantee that our study materials will be suitable for all people and meet the demands of all people, including students, workers and housewives and so on. If you decide to buy and use the 350-401 Test Fee training materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt.
The first goal of our company is to help all people to pass the 350-401 Mock exam and get the related certification in the shortest time. Through years of concentrated efforts of our excellent experts and professors, our company has compiled the best helpful and useful 350-401 Mock test training materials to meet all people’s demands, and in addition, we can assure to everyone that our study materials have a higher quality than other study materials in the global market, at the same time, these people will be easier to be admitted to the human resources supervisor. The 350-401 Mock learn prep from our company has helped thousands of people to pass the exam and get the related certification, and then these people have enjoyed a better job and a better life.
Cisco 350-401 Mock - These services assure your avoid any loss.
Our 350-401 Mock exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Mock study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. The exam candidates of our 350-401 Mock study materials are the best living and breathing ads. Just look at the comments on the 350-401 Mock training guide, you will know that how popular they are among the candidates.
And not only the content is contained that you can free download from the website, also you can find that the displays of the 350-401 Mock study materials can be tried as well for we have three versions, according we also have three kinds of free demos. We have free demos of our 350-401 Mock exam questions for your information and the demos offer details of real exam contents.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
You will find the exam is a piece of cake with the help of our SAP C-ARCIG-2508 study materials. Many exam candidates build long-term relation with our company on the basis of our high quality PMI PMP guide engine. And if you want to get all benefits like that, our Microsoft SC-300 training quiz is your rudimentary steps to begin. All contents of Cisco 200-301-KR training guide are being explicit to make you have explicit understanding of this exam. Free demos of our Workday Workday-Pro-Integrations study guide are understandable materials as well as the newest information for your practice.
Updated: May 28, 2022