To keep pace with the times, we believe science and technology can enhance the way people study on our 350-401 Ppt exam materials. Especially in such a fast-pace living tempo, we attach great importance to high-efficient learning our 350-401 Ppt study guide. Therefore, our 350-401 Ppt study materials base on the past exam papers and the current exam tendency, and design such an effective simulation function to place you in the real exam environment. 350-401 Ppt exam materials contain all the questions and answers to pass 350-401 Ppt exam on first try. The Questions & answers are verified and selected by professionals in the field and ensure accuracy and efficiency throughout the whole Product. You will earn a high salary in a short time.
Our 350-401 Ppt exam questions have a lot of advantages.
You can practice the questions on practice software in simulated real 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Ppt exam scenario or you can use simple PDF format to go through all the real 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Ppt exam questions. But if you are unfortunate to fail in the exam we will refund you immediately in full and the process is very simple. If only you provide the scanning copy of the 350-401 Associate Level Exam failure marks we will refund you immediately.
Our 350-401 Ppt practice dumps compiled by the most professional experts can offer you with high quality and accuracy practice materials for your success. Up to now, we have more than tens of thousands of customers around the world supporting our 350-401 Ppt exam questions. If you are unfamiliar with our 350-401 Ppt study materials, please download the free demos for your reference, and to some unlearned exam candidates, you can master necessities by our 350-401 Ppt training guide quickly.
Cisco 350-401 Ppt - Try to immerse yourself in new experience.
Our 350-401 Ppt training dumps are highly salable not for profit in our perspective solely, they are helpful tools helping more than 98 percent of exam candidates get the desirable outcomes successfully. Our 350-401 Ppt guide prep is priced reasonably with additional benefits valuable for your reference. High quality and accuracy 350-401 Ppt exam materials with reasonable prices can totally suffice your needs about the exam. All those merits prefigure good needs you may encounter in the near future.
Just remember that all your efforts will finally pay off. At present, our company has launched all kinds of 350-401 Ppt study materials, which almost covers all official tests.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Just as exactly, to obtain the certification of PMI PMP exam braindumps, you will do your best to pass the according exam without giving up. If you buy the Microsoft PL-600 exam dumps from our company, we can make sure that you will have the right to enjoy the 24 hours full-time online service. IIBA CPOA - Since our professional experts simplify the content, you can easily understand and grasp the important and valid information. CompTIA SY0-701 - You will never enjoy life if you always stay in your comfort zone. Microsoft AI-900-CN - What is more, usually we will give some discounts to our worthy customers.
Updated: May 28, 2022