The price of our 350-401 Practice learning guide is among the range which you can afford and after you use our 350-401 Practice study materials you will certainly feel that the value of the 350-401 Practice exam questions far exceed the amount of the money you pay for the pass rate of our practice quiz is 98% to 100% which is unmarched in the market. Choosing our 350-401 Practice study guide equals choosing the success and the perfect service. Are you still satisfied with your present job? Do you still have the ability to deal with your job well? Do you think whether you have the competitive advantage when you are compared with people working in the same field? If your answer is no，you are a right place now. Because our 350-401 Practice exam torrent will be your good partner and you will have the chance to change your work which you are not satisfied with, and can enhance your ability by our 350-401 Practice guide questions, you will pass the exam and achieve your target. We believe our consummate after-sale service system will make our customers feel the most satisfactory.
But our 350-401 Practice exam questions have made it.
We have clear data collected from customers who chose our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice training engine, the passing rate is 98-100 percent. Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our 350-401 Valid Test Notes exam questions just focus on what is important and help you achieve your goal.
with our 350-401 Practice exam dumps for 20 to 30 hours, we can claim that our customers are confident to take part in your 350-401 Practice exam and pass it for sure. In the progress of practicing our 350-401 Practice study materials, our customers improve their abilities in passing the 350-401 Practice exam, we also upgrade the standard of the exam knowledge. Therefore, this indeed helps us establish a long-term cooperation relationship on our exam braindumps.
Cisco 350-401 Practice - These services assure your avoid any loss.
Our 350-401 Practice exam braindumps have become a brand that is good enough to stand out in the market. The high quality product like our 350-401 Practice study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. The exam candidates of our 350-401 Practice study materials are the best living and breathing ads. Just look at the comments on the 350-401 Practice training guide, you will know that how popular they are among the candidates.
We have free demos of our 350-401 Practice exam questions for your information and the demos offer details of real exam contents. All contents of 350-401 Practice practice quiz contain what need to be mastered.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
You will find the exam is a piece of cake with the help of our Medical Professional CHFM study materials. And our Salesforce Analytics-Arch-201 training braindumps have became their best assistant on the way to pass the exam. And if you want to get all benefits like that, our Pegasystems PEGACPDS25V1 training quiz is your rudimentary steps to begin. All contents of WGU Managing-Cloud-Security training guide are being explicit to make you have explicit understanding of this exam. Under coordinated synergy of all staff, our SAP C-TS422-2504 practice braindumps achieved a higher level of perfection by keeping close attention with the trend of dynamic market.
Updated: May 28, 2022