Goldmile-Infobiz is a wonderful study platform that contains our hearty wish for you to pass the exam by our 350-401 Practice exam materials. So our responsible behaviors are our instinct aim and tenet. By devoting in this area so many years, we are omnipotent to solve the problems about the 350-401 Practice learning questions with stalwart confidence. Cisco 350-401 Practice is a certification exam which is able to change your life. IT professionals who gain Cisco 350-401 Practice authentication certificate must have a higher salary than the ones who do not have the certificate and their position rising space is also very big, who will have a widely career development prospects in the IT industry in. Our commitment of helping you to pass 350-401 Practice exam will never change.
CCNP Enterprise 350-401 Everyone wants to succeed.
CCNP Enterprise 350-401 Practice - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) I believe that everyone in the IT area is eager to have it. You can instantly download the Cisco New 350-401 Practice Materials practice dumps and concentrate on your study immediately. As a prestigious platform offering practice material for all the IT candidates, Goldmile-Infobiz experts try their best to research the best valid and useful Cisco New 350-401 Practice Materials exam dumps to ensure you 100% pass.
In the such a brilliant era of IT industry in the 21st century competition is very fierce. Naturally, Cisco certification 350-401 Practice exam has become a very popular exam in the IT area. More and more people register for the exam and passing the certification exam is also those ambitious IT professionals' dream.
Cisco 350-401 Practice - We sincerely hope that you can pass the exam.
As this version is called software version or PC version, maybe many candidates may think our 350-401 Practice PC test engine may just be used on personal computers. At first, it can be only used on PC. But with our IT staff's improvement, now our Cisco 350-401 Practice PC test engine can be installed on all electronic products. You can copy to your mobile, Ipad or others. No matter anywhere or any time you want to learn 350-401 Practice PC test engine, it is convenient for you. For busy workers, you can make the best of your time on railway or bus, mastering one question and answers every time will be great.
Goldmile-Infobiz's Cisco 350-401 Practice exam training materials is ensure that you fully understand the questions and issues behind the concept. t can help you pass the exam easily.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Our Microsoft PL-300-KR dumps torrent contains everything you want to solve the challenge of real exam. If you need IT exam training materials, if you do not choose Goldmile-Infobiz's Cisco Genesys GCP-GCX exam training materials, you will regret forever. Our website offers you the latest preparation materials for the Huawei H19-338 real exam and the study guide for your review. Juniper JN0-232 - The main thing for you is to take IT certification exam that is accepted commonly which will help you to open a new journey. Microsoft SC-900 - They are version of the PDF,the Software and the APP online.
Updated: May 28, 2022