Now you can free download part of practice questions and answers of Cisco certification 350-401 Simulator exam on Goldmile-Infobiz. When you select Goldmile-Infobiz, you can not only pass Cisco certification 350-401 Simulator exam, but also have one year free update service. Goldmile-Infobiz can also promise if you fail to pass the exam, Goldmile-Infobiz will 100% refund. As long as you never abandon yourself, you certainly can make progress. Now, our 350-401 Simulator exam questions just need you to spend some time on accepting our guidance, then you will become popular talents in the job market. Candidates who participate in the Cisco certification 350-401 Simulator exam should select exam practice questions and answers of Goldmile-Infobiz, because Goldmile-Infobiz is the best choice for you.
CCNP Enterprise 350-401 I wish you good luck.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulator exam questions have three versions: the PDF, Software and APP online. If you fail the exam, we will give a full refund to you. We all know that in the fiercely competitive IT industry, having some IT authentication certificates is very necessary.
More importantly, the online version of 350-401 Simulator study practice dump from our company can run in an off-line state, it means that if you choose the online version, you can use the 350-401 Simulator exam questions when you are in an off-line state. In a word, there are many advantages about the online version of the 350-401 Simulator prep guide from our company. The experts and professors of our company have designed the three different versions of the 350-401 Simulator prep guide, including the PDF version, the online version and the software version.
Cisco 350-401 Simulator - You can totally rely on us.
Goldmile-Infobiz provide different training tools and resources to prepare for the Cisco 350-401 Simulator exam. The preparation guide includes courses, practice test, test engine and part free PDF download.
Goldmile-Infobiz's study guides are your best ally to get a definite success in 350-401 Simulator exam. The guides contain excellent information, exam-oriented questions and answers format on all topics of the certification syllabus.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Goldmile-Infobiz guarantee that Cisco Microsoft SC-401 exam questions and answers can help you to pass the exam successfully. If for any reason, a candidate fails in APICS CSCP-KR exam then he will be refunded his money after the refund process. Microsoft AI-102 - You can control the kinds of questions and some of the problems and the time of each test. Amazon DOP-C02-KR - Goldmile-Infobiz offers the most comprehensive and updated braindumps for Cisco’s certifications. SAP C-ARCON-2508 - Practice what you preach is the beginning of success.
Updated: May 28, 2022