After the payment for our 350-401 Simulator exam materials is successful, you will receive an email from our system within 5-10 minutes; then, click on the link to log on and you can use 350-401 Simulator preparation materials to study immediately. In fact, you just need spend 20~30h effective learning time if you match 350-401 Simulator guide dumps and listen to our sincere suggestions. Then you will have more time to do something else you want. We will also provide some discount for your updating after a year if you are satisfied with our 350-401 Simulator exam prepare. The key trait of our product is that we keep pace with the changes of syllabus and the latest circumstance to revise and update our 350-401 Simulator study materials, and we are available for one-year free updating to assure you of the reliability of our service. Once they find it possible to optimize the 350-401 Simulator study guide, they will test it for many times to ensure the stability and compatibility.
CCNP Enterprise 350-401 So we understand your worries.
Goldmile-Infobiz can satisfy the fundamental demands of candidates with concise layout and illegible outline of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Simulator exam questions. At the moment when you decided to choose our Real 350-401 Exams real dumps, we feel the responsibility to be with you during your journey to prepare for the Real 350-401 Exams exam. So we clearly understand our duty to offer help in this area.
And we will give some discounts from time to time. Although our 350-401 Simulator practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the 350-401 Simulator exam.
Cisco 350-401 Simulator - It will be a first step to achieve your dreams.
After undergoing a drastic change over these years, our 350-401 Simulator actual exam have been doing perfect job in coping with the exam. Up to now our 350-401 Simulator practice materials account for 60 percent of market share in this line for their efficiency and accuracy when dealing with the exam. With the best reputation in the market our 350-401 Simulator training materials can help you ward off all unnecessary and useless materials and spend all your limited time on practicing most helpful questions.
Our 350-401 Simulator real exam try to ensure that every customer is satisfied, which can be embodied in the convenient and quick refund process. Although the passing rate of our 350-401 Simulator training quiz is close to 100%, if you are still worried, we can give you another guarantee: if you don't pass the exam, you can get a full refund.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
If you want to have an outline and brief understanding of our CISI IFC preparation materials we offer free demos for your reference. You just should take the time to study Amazon AIF-C01 preparation materials seriously, no need to refer to other materials, which can fully save your precious time. By gathering, analyzing, filing essential contents into our Real Estate Massachusetts-Real-Estate-Salesperson training quiz, they have helped more than 98 percent of exam candidates pass the Real Estate Massachusetts-Real-Estate-Salesperson exam effortlessly and efficiently. Though our HP HPE2-W12 training guide is proved to have high pass rate, but If you try our HP HPE2-W12 exam questions but fail in the final exam, we can refund the fees in full only if you provide us with a transcript or other proof that you failed the exam. Real Estate Massachusetts-Real-Estate-Salesperson - There are many IT staffs online every day; you can send your problem, we are glad to help you solve your problem.
Updated: May 28, 2022