350-401 Success study materials are here waiting for you! With a higher status, your circle of friends will expand. You will become friends with better people. According to your actual situation, you can choose the suitable version from our 350-401 Success study question. We believe that the suitable version will help you improve your learning efficiency. We also welcome the suggestions from our customers, as long as our clients propose rationally.
CCNP Enterprise 350-401 Giving is proportional to the reward.
The 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Success study materials are of great help in this sense. Once you have used our Latest 350-401 Exam Answers exam training in a network environment, you no longer need an internet connection the next time you use it, and you can choose to use Latest 350-401 Exam Answers exam training at your own right. Our Latest 350-401 Exam Answers exam training do not limit the equipment, do not worry about the network, this will reduce you many learning obstacles, as long as you want to use Latest 350-401 Exam Answers test guide, you can enter the learning state.
You can free download part of 350-401 Success simulation test questions and answers of 350-401 Success exam dumps and print it, using it when your eyes are tired. It is more convenient for you to look and read while protect our eye. If you print the 350-401 Success exam materials out, you are easy to carry it with you when you out, it is to say that will be a most right decision to choose the 350-401 Success, you will never regret it.
Cisco 350-401 Success - The results are accurate.
Good opportunities are always for those who prepare themselves well. You should update yourself when you are still young. Our 350-401 Success study materials might be a good choice for you. The contents of our study materials are the most suitable for busy people. You can have a quick revision of the 350-401 Success study materials in your spare time. Also, you can memorize the knowledge quickly. There almost have no troubles to your normal life. You can make use of your spare moment to study our 350-401 Success study materials. The results will become better with your constant exercises. Please have a brave attempt.
For instance, you can begin your practice of the 350-401 Success study materials when you are waiting for a bus or you are in subway with the PDF version. When you are at home, you can use the windows software and the online test engine of the 350-401 Success study materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
In Goldmile-Infobiz you can find exam tips and materials about Cisco certification EXIN CDCS exam. However, how to pass Cisco certification Microsoft AB-900 exam quickly and simply? Our Goldmile-Infobiz can always help you solve this problem quickly. Microsoft PL-200 - Goldmile-Infobiz's information resources are very wide and also very accurate. Cisco 350-801 - Through so many feedbacks of these products, our Goldmile-Infobiz products prove to be trusted. HP HPE0-J68-KR - If you choose the help of Goldmile-Infobiz, we will spare no effort to help you pass the exam.
Updated: May 28, 2022