In our software version of the 350-401 Syllabus exam dumps, the unique point is that you can take part in the practice test before the real 350-401 Syllabus exam. You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 350-401 Syllabus exam. Second, in terms of quality, we guarantee the authority of 350-401 Syllabus study materials in many ways. You can just have a look at the pass rate of the 350-401 Syllabus learning guide, it is high as 98% to 100% which is unique in the market. Under the instruction of our 350-401 Syllabus test prep, you are able to finish your task in a very short time and pass the exam without mistakes to obtain the Cisco certificate.
CCNP Enterprise 350-401 You may have gone through a lot of exams.
We are considered the best ally to our customers who want to pass their 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Syllabus exam by their first attempt and achieve the certification successfully! Our 350-401 Test Sample Online exam dumps strive for providing you a comfortable study platform and continuously explore more functions to meet every customer’s requirements. We may foresee the prosperous talent market with more and more workers attempting to reach a high level through the Cisco certification.
And the warm feedbacks from our customers all over the world prove that we are considered the most popular vendor in this career. our 350-401 Syllabus study materials are undeniable excellent products full of benefits, so they can spruce up our own image. Besides, our 350-401 Syllabus practice braindumps are priced reasonably, so we do not overcharge you at all.
Cisco 350-401 Syllabus - I will show you our study materials.
In seeking professional 350-401 Syllabus exam certification, you should think and pay more attention to your career path of education, work experience, skills, goals, and expectations. The examinee must obtain the 350-401 Syllabus exam certification through a number of examinations that are directly traced to their professional roles. Today, I will tell you a good way to pass the exam that is to choose 350-401 Syllabus exam materials valid study questions free download exam training materials. It can help you to pass the exam. What’s more, you choose 350-401 Syllabus exam materials will have many guarantee.
Taking this into consideration, we have tried to improve the quality of our 350-401 Syllabus training materials for all our worth. Now, I am proud to tell you that our 350-401 Syllabus study dumps are definitely the best choice for those who have been yearning for success but without enough time to put into it.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
You may never have thought that preparing for the upcoming Lpi 101-500 certification exam would be so simple. We can assure you that you will get the latest version of our Workday Workday-Pro-Compensation training materials for free from our company in the whole year after payment. After you purchase our IIA IIA-CIA-Part2 study guide, you can make the best use of your spare time to update your knowledge. The software of our ISTQB ISTQB-CTFL-KR test torrent provides the statistics report function and help the students find the weak links and deal with them. As a top selling product in the market, our CIPS L4M4 study guide has many fans.
Updated: May 28, 2022