You can also free download part of examination questions and answers about Cisco 350-401 Training in Goldmile-Infobiz. Goldmile-Infobiz will timely provide you free updates about Cisco 350-401 Training exam materials. Besides, the exam materials we sold are to provide the answers. The 350-401 Training certification exam training tools contains the latest studied materials of the exam supplied by IT experts. In the past few years, Cisco certification 350-401 Training exam has become an influenced computer skills certification exam. Goldmile-Infobiz have a huge senior IT expert team.
CCNP Enterprise 350-401 A bad situation can show special integrity.
Different person has different goals, but our Goldmile-Infobiz aims to help you successfully pass 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Training exam. Goldmile-Infobiz Cisco 350-401 Valid Practice Materials exam training materials is the best choice to help you pass the exam. The training materials of Goldmile-Infobiz website have a unique good quality on the internet.
We can be along with you in the development of IT industry. Give you a helping hand. Probably many people have told you how difficult the 350-401 Training exam is; however, our Goldmile-Infobiz just want to tell you how easy to pass 350-401 Training exam.
Cisco 350-401 Training - Sometimes choice is greater than important.
Goldmile-Infobiz Cisco 350-401 Training practice test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.
The contents of 350-401 Training free download pdf will cover the 99% important points in your actual test. In case you fail on the first try of your exam with our 350-401 Training free practice torrent, we will give you a full refund on your purchase.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
CIPS L4M5 - With Goldmile-Infobiz real questions and answers, when you take the exam, you can handle it with ease and get high marks. The smartest way of getting high passing score in HP HPE2-E84 valid test is choosing latest and accurate certification learning materials. Our EXIN CDCS exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our EXIN CDCS exam software, you can improve your study ability to obtain EXIN CDCS exam certification. Our website always checks the update of Juniper JN0-105 test questions to ensure the accuracy of our study materials and keep the most up-to-dated exam requirements. After confirmation, we will immediately refund all the money that you purchased the CheckPoint 156-315.81 exam materials.
Updated: May 28, 2022