Actually we eliminate the barriers blocking you from our 350-401 Tutorials practice materials. All types of our 350-401 Tutorials exam questions are priced favorably on your wishes. Obtaining our 350-401 Tutorials study guide in the palm of your hand, you can achieve a higher rate of success. Only by regular practice can you ingest more useful information than others. And our 350-401 Tutorials exam questions can help you change your fate and choosing our 350-401 Tutorials preparation materials is foreshadow of your success. If you have made up your mind to get respect and power, the first step you need to do is to get the 350-401 Tutorials certification, because the certification is a reflection of your ability.
CCNP Enterprise 350-401 So our customers can pass the exam with ease.
Do not worry, the Goldmile-Infobiz Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Tutorials exam certification training materials will help you solve these problems. If you like to use computer to learn, you can use the Software and the APP online versions of the Latest 350-401 Associate Level Exam exam questions. If you like to write your own experience while studying, you can choose the PDF version of the Latest 350-401 Associate Level Exam study materials.
Although Cisco 350-401 Tutorials exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because Goldmile-Infobiz's Cisco 350-401 Tutorials exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused.
Cisco 350-401 Tutorials - In order to success, don't miss Goldmile-Infobiz.
Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our 350-401 Tutorials learning guide in the international market, thus there are three different versions of our 350-401 Tutorials exam materials which are prepared to cater the different demands of various people. It is worth mentioning that, the simulation test is available in our software version. With the simulation test, all of our customers will get accustomed to the 350-401 Tutorials exam easily, and get rid of bad habits, which may influence your performance in the real 350-401 Tutorials exam. In addition, the mode of 350-401 Tutorials learning guide questions and answers is the most effective for you to remember the key points. During your practice process, the 350-401 Tutorials test questions would be absorbed, which is time-saving and high-efficient.
But have you tried it? We often hear this, “Goldmile-Infobiz questions and answers are really good reference materials, thanks to the dumps, I pass my exam successfully.” Goldmile-Infobiz has been favourably commented by the people who used its questions and answers. This is because it can really help students to save a lot of time, and ensure that everyone pass the exam successfully.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
And then you can start your study after downloading the Microsoft PL-400 exam questions in the email attachments. Please trust us, and wish you good luck to pass Pegasystems PEGACPBA24V1 exam. Though at first a lot of our new customers didn't believe our IAPP CIPP-E exam questions, but they have became the supporters now. If you want to own a better and bright development in the IT your IT career, it is the only way for you to pass Salesforce MC-101 exam. As a result, many customers get manifest improvement and lighten their load by using our Avaya 78202T actual exam.
Updated: May 28, 2022