Our 200-301 Actual Tests training materials are designed to help users consolidate what they have learned, will add to the instant of many training, the user can test their learning effect in time after finished the part of the learning content, have a special set of wrong topics in our 200-301 Actual Tests guide dump, enable users to find their weak spot of knowledge in this function, iterate through constant practice, finally reach a high success rate. As a result, our 200-301 Actual Tests study questions are designed to form a complete set of the contents of practice can let users master knowledge as much as possible, although such repeated sometimes very boring, but it can achieve good effect of consolidation. In our study, we found that many people have the strongest ability to use knowledge for a period of time at the beginning of their knowledge. Details determine success or failure, so our every detail is strictly controlled. For example, our learning material's Windows Software page is clearly, our 200-301 Actual Tests Learning material interface is simple and beautiful. Our 200-301 Actual Tests real exam materials are not exceptional also, in order to enjoy the best product experience, as long as the user is in use process found any problem, can timely feedback to us, for the first time you check our 200-301 Actual Tests exam question performance, professional maintenance staff to help users solve problems.
CCNA 200-301 These services assure your avoid any loss.
The high quality product like our 200-301 - Cisco Certified Network Associate Exam Actual Tests study quiz has no need to advertise everywhere, and exerts influential effects which are obvious and everlasting during your preparation. We have free demos of our 200-301 Valid Exam Questions Answers exam questions for your information and the demos offer details of real exam contents. All contents of 200-301 Valid Exam Questions Answers practice quiz contain what need to be mastered.
You will find the exam is a piece of cake with the help of our 200-301 Actual Tests study materials. Being anxious for the 200-301 Actual Tests exam ahead of you? Have a look of our 200-301 Actual Tests training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 200-301 Actual Tests learning questions, and it is their job to officiate the routines of offering help for you.
Cisco 200-301 Actual Tests - It can maximize the efficiency of your work.
As is known to us, there are best sale and after-sale service of the 200-301 Actual Tests study materials all over the world in our company. Our company has employed a lot of excellent experts and professors in the field in the past years, in order to design the best and most suitable 200-301 Actual Tests study materials for all customers. More importantly, it is evident to all that the 200-301 Actual Tests study materials from our company have a high quality, and we can make sure that the quality of our products will be higher than other study materials in the market. If you want to pass the 200-301 Actual Tests exam and get the related certification in the shortest time, choosing the 200-301 Actual Tests study materials from our company will be in the best interests of all people. We can make sure that it will be very easy for you to pass your exam and get the related certification in the shortest time that beyond your imagination.
Do not hesitate, add the exam material to your shopping cart quickly. If you miss it you will regret for a lifetime.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Amazon AWS-Developer - And you will have the demos to check them out. IBM C1000-189 - Help you in your career in your advantage successfully. Fortinet FCP_FGT_AD-7.6 - You can find their real comments in the comments sections. CompTIA CAS-005 - Dreams and hopes are important, but more important is to go to practice and prove. Fortinet FCP_FAZ_AN-7.6 - Many people always are stopped by the difficult questions.
Updated: May 28, 2022