Once our 200-301 Cert Test learning materials are updated, we will automatically send you the latest information about our 200-301 Cert Test exam question. We assure you that our company will provide customers with a sustainable update system. We will have a dedicated specialist to check if our 200-301 Cert Test learning materials are updated daily. All pages of the 200-301 Cert Test exam simulation are simple and beautiful. As long as you click on them, you can find the information easily and fast. Nowadays, all of us are living a fast-paced life and we have to deal with things with high-efficience.
CCNA 200-301 While it is not truth.
Goldmile-Infobiz is a website which can help you save time and energy to rapidly and efficiently master the Cisco certification 200-301 - Cisco Certified Network Associate Exam Cert Test exam related knowledge. They give users access to information and exam, offering simulative testing environment when you participate it like in the classroom. And if you are afraid of the lack experience of the exam, our Latest Study Guide 200-301 Free practice engine will be your good choice.
Feedbacks of many IT professionals who have passed Cisco certification 200-301 Cert Test exam prove that their successes benefit from Goldmile-Infobiz's help. Goldmile-Infobiz's targeted test practice questions and answers to gave them great help, which save their valuable time and energy, and allow them to easily and smoothly pass their first Cisco certification 200-301 Cert Test exam. So Goldmile-Infobiz a website worthy of your trust.
Cisco 200-301 Cert Test - So it will never appear flash back.
Are you racking your brains for a method how to pass Cisco 200-301 Cert Test exam? Cisco 200-301 Cert Test certification test is one of the valuable certification in modern IT certification. Within the last few decades, IT got a lot of publicity and it has been a necessary and desirable part of modern life. Cisco certification has been well recognized by international community. So, most IT people want to improve their knowledge and their skills by Cisco certification exam. 200-301 Cert Test test is one of the most important exams and the certificate will bring you benefits.
Perhaps you worry about the quality of our 200-301 Cert Test exam questions. We can make solemn commitment that our 200-301 Cert Test study materials have no mistakes.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Fortinet NSE4_FGT_AD-7.6 - We assure Goldmile-Infobiz provide you with the latest and the best questions and answers which will let you pass the exam at the first attempt. Also, it will display how many questions of the ISACA CISA-CN exam questions you do correctly and mistakenly. ServiceNow CIS-TPRM - You can visit Goldmile-Infobiz to download our free demo. Pure Storage FAAA_005 - In addition, the software version is not limited to the number of the computer. Our target is to reduce your pressure and improve your learning efficiency from preparing for Huawei H13-324_V2.0 exam.
Updated: May 28, 2022