What do you think of Cisco 200-301 Cert Test certification exam? As one of the most popular Cisco certification exams, 200-301 Cert Test test is also very important. When you are looking for reference materials in order to better prepare for the exam, you will find it is very hard to get the excellent exam dumps. What should we do? It doesn't matter. Our 200-301 Cert Test preparation practice are highly targeted and have a high hit rate, there are a lot of learning skills and key points in the exam, even if your study time is very short, you can also improve your 200-301 Cert Test exam scores very quickly. Even if you have a week foundation, I believe that you will get the certification by using our 200-301 Cert Test study materials. We guarantee to give you a full refund of the cost you purchased our dump if you fail 200-301 Cert Test exam for the first time after you purchased and used our exam dumps.
CCNA 200-301 Do not worry.
We truly treat our customers with the best quality service and the most comprehensive 200-301 - Cisco Certified Network Associate Exam Cert Test exam pdf, that's why we enjoy great popularity among most IT workers. If you decide to buy our 200-301 Latest Dumps study question, we can promise that we will send you the latest information every day. As is known to us, it must be of great importance for you to keep pace with the times.
Dear candidates, pass your test with our accurate & updated 200-301 Cert Test training tools. As we all know, the well preparation will play an important effect in the 200-301 Cert Test actual test. Now, take our 200-301 Cert Test as your study material, and prepare with careful, then you will pass successful.
Cisco 200-301 Cert Test - Perhaps you do not understand.
Revision of your 200-301 Cert Test exam learning is as essential as the preparation. For that purpose, 200-301 Cert Test exam dumps contains specially created real exam like practice questions and answers. They are in fact meant to provide you the opportunity to revise your learning and overcome your 200-301 Cert Test exam fear by repeating the practice tests as many times as you can. Preparation for 200-301 Cert Test exam using our 200-301 Cert Test exam materials are sure to help you obtain your targeted percentage too.
As long as you are convenient, you can choose to use a computer to learn, you can also choose to use mobile phone learning. No matter where you are, you can choose your favorite equipment to study our 200-301 Cert Test learning materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
By using our updated VMware 2V0-16.25 products, you will be able to get reliable and relative VMware 2V0-16.25 exam prep questions, so you can pass the exam easily. Microsoft SC-900 - Today's era is a time of fierce competition. Our experts have worked hard for several years to formulate Fortinet NSE4_FGT_AD-7.6 exam braindumps for all examiners. Amazon AWS-Developer-KR - You can think about whether these advantages are what you need! In fact, you just need spend 20~30h effective learning time if you match HP HPE3-CL01 guide dumps and listen to our sincere suggestions.
Updated: May 28, 2022