Our product is elaborately composed with major questions and answers. Our study materials are choosing the key from past materials to finish our 200-301 Dump Collection torrent prep. It only takes you 20 hours to 30 hours to do the practice. But our IT elite of Goldmile-Infobiz and our customers who are satisfied with our 200-301 Dump Collection exam software give us the confidence to make such promise. It is our responsibility to relieve your pressure from preparation of 200-301 Dump Collection exam. I will recommend our study materials to you.
CCNA 200-301 Our products are just suitable for you.
Time is the sole criterion for testing truth, similarly, passing rates are the only standard to test whether our 200-301 - Cisco Certified Network Associate Exam Dump Collection study materials are useful. You will get your 200-301 Pass Guaranteed certification with little time and energy by the help of out dumps. Goldmile-Infobiz is constantly updated in accordance with the changing requirements of the Cisco certification.
Once you submit your questions, we will soon give you detailed explanations. Even you come across troubles during practice the 200-301 Dump Collection learning materials; we will also help you solve the problems. We are willing to deal with your problems.
Cisco 200-301 Dump Collection - Each user's situation is different.
The disparity between our 200-301 Dump Collection practice materials and others are distinct. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our 200-301 Dump Collection real exam are devised and written base on the real exam. Do not let other 200-301 Dump Collection study dumps mess up your performance or aggravate learning difficulties. The efficiency and accuracy of our 200-301 Dump Collection learning guide will not let you down.
You must recognize the seriousness of leaking privacy. For security, you really need to choose an authoritative product like our 200-301 Dump Collection learning braindumps.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Remember that each Microsoft SC-401 exam preparation is built from a common certification foundation.Microsoft SC-401 prepareation will provide the most excellent and simple method to pass your Microsoft SC-401 Certification Exams on the first attempt. Google Generative-AI-Leader - Regarding the process of globalization, every fighter who seeks a better life needs to keep pace with its tendency to meet challenges. The ACAMS CAMS7-CN preparation products available here are provided in line with latest changes and updates in ACAMS CAMS7-CN syllabus. We are proud that we have engaged in this career for over ten yeas and helped tens of thousands of the candidates achieve their Amazon SAP-C02-KR certifications, and our Amazon SAP-C02-KR exam questions are becoming increasingly obvious degree of helping the exam candidates with passing rate up to 98 to 100 percent. After our unremitting efforts, Microsoft AI-102-KR learning guide comes in everybody's expectation.
Updated: May 28, 2022