It is very convenient for you to use PDF real questions and answers. And you can download these materials and print it out for study at any time. The SOFT version simulates the real exam which will give you more realistic feeling. The results many people used prove that Goldmile-Infobiz success rate of up to 100%. Goldmile-Infobiz is the only way that suits you to pass the exam, choose it equal to create a better future. If you would like to sail through the test, come on and try it.
CCNA 200-301 You get what you pay for.
Our training materials contain the latest exam questions and valid 200-301 - Cisco Certified Network Associate Exam Dumps Vce exam answers for the exam preparation, which will ensure you clear exam 100%. If you are willing to buy our 200-301 Valid Test Syllabus dumps pdf, I will recommend you to download the free dumps demo first and check the accuracy of our 200-301 Valid Test Syllabus practice questions. Maybe there are no complete 200-301 Valid Test Syllabus study materials in our trial, but it contains the latest questions enough to let you understand the content of our 200-301 Valid Test Syllabus braindumps.
It is so cool even to think about it. As we all know that the electronic equipment provides the convenience out of your imagination.With our APP online version of our 200-301 Dumps Vcepractice materials, your attempt will come true. Our 200-301 Dumps Vce exam dumps can be quickly downloaded to the eletronic devices.
Cisco 200-301 Dumps Vce - So your success is guaranteed.
Free renewal of our 200-301 Dumps Vce study prep in this respect is undoubtedly a large shining point. Apart from the advantage of free renewal in one year, our 200-301 Dumps Vce exam engine offers you constant discounts so that you can save a large amount of money concerning buying our 200-301 Dumps Vce training materials. And we give these discount from time to time, so you should come and buy 200-301 Dumps Vce learning guide more and you will get more rewards accordingly.
We have harmonious cooperation with exam candidates. The relation comes from the excellence of our 200-301 Dumps Vce training materials.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Even you have bought our Microsoft AI-900 learning braindumps, and we will send the new updates to you one year long. ACFE CFE-Investigation - Our high passing rate is the leading position in this field. The moment you money has been transferred to our account, and our system will send our Google Generative-AI-Leadertraining dumps to your mail boxes so that you can download Google Generative-AI-Leader exam questions directly. Microsoft SC-300 - You will never be frustrated by the fact that you can't solve a problem. Meanwhile, if you want to keep studying this course , you can still enjoy the well-rounded services by Salesforce Agentforce-Specialist test prep, our after-sale services can update your existing Salesforce Agentforce-Specialist study quiz within a year and a discount more than one year.
Updated: May 28, 2022