Most of the experts have been studying in the professional field for many years and have accumulated much experience in our 200-301 Exam Cost practice questions. The high-quality of our 200-301 Exam Cost exam questions are praised by tens of thousands of our customers. You may try it! Our company is a well-known multinational company, has its own complete sales system and after-sales service worldwide. In the same trade at the same time, our 200-301 Exam Cost real study dumps have become a critically acclaimed enterprise, so, if you are preparing for the exam qualification and obtain the corresponding certificate, so our company launched 200-301 Exam Cost exam questions are the most reliable choice of you. The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge.
CCNA 200-301 They can be obtained within five minutes.
As a result, many customers get manifest improvement and lighten their load by using our 200-301 - Cisco Certified Network Associate Exam Exam Cost latest dumps. All exam materials in 200-301 Valid Exam Collection Materials learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods.
The second one of 200-301 Exam Cost test guide is emphasis on difficult and hard-to-understand points. Experts left notes for your reference, and we believe with their notes things will be easier. In addition, the new supplementary will be sent to your mailbox if you place order this time with beneficial discounts at intervals.
Cisco 200-301 Exam Cost - God will help those who help themselves.
Can you imagine that you only need to review twenty hours to successfully obtain the 200-301 Exam Cost certification? Can you imagine that you don’t have to stay up late to learn and get your boss’s favor? With 200-301 Exam Cost study quiz, passing exams is no longer a dream. If you are an office worker, 200-301 Exam Cost preparation questions can help you make better use of the scattered time to review. Just visit our website and try our 200-301 Exam Cost exam questions, then you will find what you need.
Do not reject learning new things. Maybe your life will be changed a lot after learning our 200-301 Exam Cost training questions.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Adobe AD0-E137 test questions have so many advantages that basically meet all the requirements of the user. We believe our study materials will be very useful and helpful for all people who are going to prepare for the Pennsylvania Real Estate Commission RePA_Sales_S exam. You are not required to pay any amount or getting registered with us for downloading free Pennsylvania Real Estate Commission RePA_Sales_S materials. APMG-International AgilePM-Foundation - Of course, if you choose our study materials, you will have the chance to experience our PDF version. Amazon SAA-C03 - As we all know, sometimes the right choice can avoid the waste of time, getting twice the result with half the effort.
Updated: May 28, 2022